JVC HR-J658EH VCR User Manual


 
EN 9
Power Save
Mode
(HR-J658E and
HR-J700E only)
Turn on the TV and select the VIDEO channel (or AV mode).
You can reduce the power consumption while the recorder is
turned off.
TURN ON THE RECORDER
1
Press .
ACCESS MAIN MENU
SCREEN
2
Press MENU.
ACCESS MODE SET SCREEN
3
Press %fi to move the
highlight bar (pointer) to
"MODE SET", then press
OK or .
SELECT POWER SAVE
MODE
4
Press %fi to move the
highlight bar (pointer) to
"POWER SAVE", then press
OK or to set to "ON".
RETURN TO NORMAL
SCREEN
5
Press MENU.
%
%
MAIN MENU
MODE SET
AUTO CH SET
MANUAL CH SET
INITIAL SET
[
5
] =
[MENU] : EXIT
MODE SET
AUTO TIMER OFF
O. S. D. ON
B. E. S. T. ON
AUTO SP=LP TIMER OFF
POWER SAVE ON
AV2 SELECT AV2
COLOUR SYSTEM PAL/NTSC
[5∞] =
[MENU] : EXIT
NOTES:
During Power Save, the display panel will be turned off.
The Just Clock function (
pg. 46) does not work while the
Power Save mode is engaged.
While the recorder is in the Power Save mode, the picture
may be distorted momentarily when you turn on/off the
recorder.
Power Save does not work when ...
... the recorder is in the Timer mode.
... the recorder's power is turned off after timer-recording (or
Instant Timer Recording).
... the Auto Satellite Prog Recording mode is engaged
(
pg. 26).
... "AV2 SELECT" is set to "DECODER" (
pg. 31).
– –:– –
123
456
7
89
0
2
4
1
3
OK
MENU