JVC HR-J758EH VCR User Manual


 
EN 23
Hi-Fi Audio Recording Level
Control (HR-DD858E/EH only)
Your recorder allows manual adjustment of the Hi-Fi audio
recording level. Normally the preset audio recording level is
satisfactory, but if the sound you are going to record is too loud
or too low, adjust the audio recording level while referring to
the recorder's audio level meters.
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS HI-FI REC LEVEL
CONTROL SCREEN
2
Press %fi to move the highlight bar (pointer) to “REC
LEVEL CTL”, then press OK or .
SELECT MODE
3
Move the highlight bar
(pointer) to “MANUAL” by
pressing %fi, then press
OK
or .
ADJUST AUDIO
RECORDING LEVEL
4
Press % or .
Press % or briefly 5 times to move the on-screen's
audio levels by one division on the scale. To move the
audio levels faster, keep % or pressed.
Adjust the recording level while watching the
recorder's audio level meters. Set the level so that
maximum volume causes the meters to vary between
0dB to 4dB.
RETURN TO NORMAL
SCREEN
5
Press MENU.
NOTE:
Noise will increase if the recording level is too low, while
distortion will increase if the level is too high.
%
%
HI-FI REC LEVEL CONTROL
PRESET
MANUAL
MIN
+
MAX
[
5
] =
[MENU] : EXIT
– –:– –
123
456
7
89
0
2
4
1
3
OK
MENU