Filter
Top Products
12
Playback
Shuttle search playback
Use this feature during playback to visually
locate any point on a recorded cassette. The
sound will be cut during shuttle search
operation.
During playback:
A
Press
Á
or
1
to engage shuttle
search forward or reverse.
8
Press
Á
to
1
again to perform high
speed.
NOTE:
Each time you press
Á
or
1
, the search
speed changes between low-speed and
high-speed.
Tracking adjustment
Automatic tracking is adjusted each time a
cassette is inserted in the video cassette
player, you may wish to adjust tracking
manually during playback.
Manual tracking:
A
Press the remote control’s AUTO.
B
Press the remote control’s
TRACKING + or – to adjust tracking.
8
Press AUTO to return to automatic
tracking.
Counter reset
A
Press
0000
to reset the counter.
Repeat playback
Use this feature to repeat playback of a
cassette 100 times.
During playback:
A
Press
$
for more than 5 seconds.
The Play indicator will blink slowly
and playback of the cassette will
repeat 100 times automatically.
B
Press
8
to stop repeat playback.
Tape playback will be stopped and the
repeat playback mode will be cancelled
.
NOTE:
Pressing
$
,
1
,
Á
or
8
also stops repeat
playback.
Rewind playback or power off
When the tape has finished rewinding, the
Video cassette player will playback or turn
itself off.
During stop:
a- For Automatic Start Of Playback
Press
1
, then press
$
within 2
seconds.
b- For Automatic Power Off
Press
1
, then press
1
within 2
seconds.
ATTENTION:
In the search, still, slow-motion or frame
advance mode,
• the picture will be distorted.
• the noise bars will appear.
• there will be loss of colour.
• the picture may not appear.
However, this is not malfunction.
HRP110.book Page 12 Tuesday, August 3, 2004 4:51 PM