Filter
Top Products
Masterpage:Right-NoTitle0
EN
41
Filename [HRS6700EU2.fm]
Page 41 February 24, 2000 10:50 am
Perfect Connections
This is an example of recommended connection if your
TV has two 21-pin AV input (SCART) connectors.
Connect the decoder to the satellite receiver’s connector
if you have a decoder, AV1 (L-1) IN/OUT connector to
TV’s connector, and AV2 (L-2) IN/DECODER connector
to the satellite receiver’s connector. Then connect the
satellite receiver and TV.
NOTES:
● Set “L-2 SELECT” to “A/V” (
੬
pg. 37).
● You can use Automatic Satellite Programme Recording
function (
੬
pg. 34) with this connection.
● To record a programme via the satellite receiver, select L-2
mode by pressing
AUX
(
NUMBER
key “
0
”) and/or
PR
so that
“L-2” appears on the front display panel.
● To receive a scrambled broadcast, descramble the signal with
the satellite receiver.
● For details, refer to the instruction manual of the satellite
receiver and decoder.
Outdoor unit
Satellite cable
Satellite receiver
Aerial
TV aerial cable
21-pin SCART
connector
Back of TV
ANT. IN
RF OUT
Aerial
connector
Decoder
Mains outlet
Back of recorder
HRS6700EU2.fm Page 41 Thursday, February 24, 2000 10:50 AM