Filter
Top Products
Masterpage:Right-NoTitle0
EN
9
Filename [HRS7950EU1-EN.fm]
Page 9 March 6, 2002 1:49 pm
Buttons with a small dot on the left side of the name can also be used to operate your JVC TV while holding down the
TV
button.
(
੬
“Operating JVC TVs” below)
This remote control transmits A code signals only; it is not applicable to B code signals.
How To Use
The remote control can operate most of your video recorder’s functions, as well as basic functions of JVC TV sets. (
੬
“Operating
JVC TVs” below)
● Point the remote control toward the receiving window.
● The maximum operating distance of the remote control is about 8 m.
Operating JVC TVs
To operate your TV, while holding down the
TV
button, press the corresponding button:
1
,
TV/VCR
,
TV PR
+/–
,
TV
%
+/–
,
^
(TV Muting).
NOTES:
●
When inserting the batteries, be sure to insert in the correct directions as indicated under the battery cover.
●
Depending on the type of JVC TV, some or all functions may not be operated using the remote control.
●
If the remote control doesn’t work properly, remove its batteries, wait a short time, replace the batteries and then try again.
HRS7950EU1-EN.book Page 9 Wednesday, March 6, 2002 1:49 PM