Filter
Top Products
40 EN
Edit From A
Camcorder Or
Another VCR
You can use a camcorder or another VCR as the player and your
VCR as the recorder.
MAKE CONNECTIONS
1
Connect an AV cable between the camcorder’s or the
playback VCR’s VIDEO OUT and AUDIO OUT
connectors and your VCR’s VIDEO IN and AUDIO IN
connectors.
For HR-VP673U owners...
• When using a monaural camcorder or a monaural
VCR, connect its AUDIO OUT connector to the
AUDIO IN L connector on your VCR.
For HR-VP473U owners...
• When using a Hi-Fi camcorder or a Hi-Fi VCR,
connect its AUDIO OUT L connector to the AUDIO
IN connector on your VCR.
LOAD A CASSETTES
2
Insert the cassette to be recorded on into your VCR and
the playback cassette into the camcorder or the
playback VCR.
SELECT “EDIT” FOR PIC-
TURE CONTROL SET MODE
3
Follow the “Picture Control” section on page 20, then
select “EDIT.”
NOTE:
When you select “EDIT” to dub tapes, be sure to select
AUTO or (NORM when VIDEO CALIBRATION is set to
OFF) after you finish dubbing the tapes.
[VP673U]
VIDEO IN
AUDIO IN
VIDEO OUT
AUDIO OUT
Camcorder
Another VCR
Your VCRRecorder
AUDIO IN
AUDIO OUT
Another VCR
VIDEO IN
Your VCR
Audio/Video cable
(not supplied)
Camcorder
VIDEO OUT
[VP473U] Recorder
EDITING (CONT.)
Audio/Video cable
(not supplied)
Player
Player
or
or
Player
Player