10
a ANT.IN
Connect the VHF/UHF/CATV antenna to this ter-
minal.
b VCR IN LINE 1 (VIDEO/AUDIO
(Left/Right))
Connect the audio/video output of an external
source (Audio system, TV/Monitor, VCR,
Camcorder).
c DVD/VCR OUT (VIDEO/AUDIO
(Left/Right))
Connect to a TV with video and audio inputs.
d COMPONENT/PROGRESSIVE SCAN
VIDEO OUT (Y Pb Pr) (DVD OUT)
Connect to a TV with Y Pb Pr inputs.
e AUDIO OUT (Left/Right) (DVD OUT)
Connect to a TV or other equipment with audio
inputs.
f AC Power Cord
Plug into the power source.
g RF. OUT
Connect to a TV with RF coaxial inputs.
h COAXIAL (DIGITAL AUDIO OUT jack)
(DVD OUT)
Connect to digital (coaxial) audio equipment.
gh
Preparation
Depending on your TV and other equipment there are various ways you can connect
the player. Please refer to the manuals of your TV, VCR, stereo system or other devices
as necessary for additional connection information.
Notes:
• The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. Position the units away
from each other or turn off the unit after removing the disc.
• Make sure the DVD+VCR is connected directly to the TV and tune the TV to the correct video input channel.
• Do not connect the DVD+VCR’s AUDIO OUT jack to the phone in jack (record deck) of your audio system.
Do not connect the DVD+VCR via another VCR. The DVD image could be distorted by the copy protection
system.
Rear Panel
abcde f
H◗❇✵✼❆❚❘✵✽❘❚❘✸✲✵✤✤✴✹✲✺✲✵✸✤✤✵✵✾✴✻✤❅M✤✤y✵✴