Filter
Top Products
22 EN
EDITING
Edit To Or
From Another
Video
Recorder
You can use your video recorder as the source player or the
recording deck.
MAKE CONNECTIONS
1
Connect the player’s AUDIO/VIDEO OUT connector to
the recorder’s AUDIO/VIDEO IN connector.
For HR-E639EE Owners . . .
● When connecting to a monaural recorder, connect
your recorder's AUDIO L IN/OUT connector to the
AUDIO IN/OUT connector on the monaural recorder.
For HR-E539EE Owners . . .
● When connecting to a Hi-Fi recorder, connect your
recorder's AUDIO IN/OUT connector to the AUDIO
L IN/OUT connector on the Hi-Fi recorder.
SET RECORDING DECK’S
INPUT MODE
2
Set to AUX. With this video recorder, press NUMBER
Key "0" or TV PROG.."F-AU"* will appear instead of a
channel number.
* "AU" will appear with HR-E539EE.
START SOURCE PLAYER
3
Engage its Play mode.
START RECORDING DECK
4
Engage its Record mode.
NOTES:
●
All necessary cables can be obtained from your dealer.
●
NTSC tapes being played back in the NTSC
[
PAL mode
(
੬
p. 25) cannot be dubbed to another recorder.
●
When you dub an NTSC tape using your recorder as the
playback deck, select NTSC 3.58 (or NTSC 4.43) with the
COLOUR SYSTEM button. (
੬
p. 24)
12
45
3
6
8
0
7
9
NUMBER "0"
TV PROG.
Another recorder
Recorder Player
Another recorder
RF Cable (provided)
VIDEO
CHANNEL
TV Receiver
Your recorder
TV Receiver
RF Cable
(provided)
IMPORTANT:
● To edit, both the player and the recorder must be of the
same colour system. Press your recorder's COLOUR
SYSTEM button to select the appropriate colour system.
● For more information on multi-system compatibility,
੬ pg. 24.
Player Your recorder Recorder
VIDEO
CHAN-
NEL
AV Cable
(not provided)
AV Cable
(not provided)