Filter
Top Products
EN 17
123
456
7
89
0
1
2
4
3
Recording
Features
Record One Programme
While Watching Another
SELECT CHANNEL TO
WATCH
1
Once recording is in progress, all you need to do is to
set the channel controls on the TV for the station you
wish to view.
● The programme selected with the TV's channel
controls appears on the TV screen while the one
selected with the PR +/ – buttons is recorded on the
tape.
Instant Timer Recording (ITR)
This easy method lets you record for from 30 minutes to 6 hours
(selectable in 30-min. increments), and shuts the recorder off
after recording is finished.
START RECORDING
1
Press RECORD on the recorder.
ENGAGE ITR MODE
2
Press RECORD again. " " blinks and 0:30 appears on
the front display panel.
SET RECORDING DURATION
3
If you want to record for more than 30 minutes, press
RECORD to extend the time. Each press extends
recording time by 30 minutes.
NOTE:
You can only perform ITR using the RECORD button on the
recorder's front panel.
RECORD
Elapsed Recording Time
Indication
You can check the exact time of a recording.
SET COUNTER DISPLAY
1
Press –
–:–
– until a counter reading appears on the
dispay panel.
● By pressing the –
–:–
– button, you can change the
display to show the counter reading, channel
position*, clock time.
*Channel position is not displayed during playback.
RESET COUNTER
2
Press 0000 before starting recording or playback.
● The counter is reset to "0:00:00" and shows the exact
elapsed time as the tape runs.
PR +/–
0000
PR +/–
–
–:–
–