June 28, 2002 2:54 pm Page 12
—12—
Master Page: Right
Up to 7 timer recording programmes within a month can be
made.
Before starting:
● Set the clock properly. (
੬
7)
● Set “SYSTEM” to the appropriate mode. (
੬
15)
● Load a cassette with the record safety tab intact.
NOTES:
● Be sure to turn off the recorder before timer recording starts.
Do not perform any operations during timer recording.
● If all the 7 programmes have already been set, “PROGRAM
FULL” appears on the screen.
● If there is a conflict in the timer schedule and one programme
overlaps with another, the programme starting earlier will be
recorded. If the start times are the same, the programme made
most recently will be recorded.
● If you wish to stop timer recording which has already started,
press 1.
● After timer recording is completed, the recorder enters the
standby mode automatically.
● If the tape reaches its end during timer recordings, the recorder
stops recording, rewinds the tape and ejects the cassette, then
enters the standby mode automatically.
● You can programme the timer recording while a regular
recording is in progress; the menu screens will not be recorded.
Timer Programming
A
Press
MENU
. Press w e to select the icon
“REC”, then press
OK
. The programme list
appears.
B
Press
OK
.
C
Press the appropriate
number keys
to
set the channel, date, start time and stop
time. Input “0” before any single number
entries.
● To time-record daily (Monday–Friday) or
weekly serials, press w e to select the
“DATE” setting, then press
OK
. Press w
e, then press
OK
.
● To set the tape speed (SP/LP/IP), press w
e to select the tape speed, then press
rt.
੬
“Intelligent LP Recording” on page 13.
D
Press
MENU
. Press
MENU
again to return to normal screen.
E
Press 1. The recorder enters timer standby mode. The timer
indicator and standby/record indicator light on the display panel.
● If a cassette has not loaded when the recorder enters the timer
standby mode, the timer indicator blinks on the display panel.
Timer Recording
REC
HR-J291_695EA-001EN.fm Page 12 Friday, June 28, 2002 2:54 PM