Filter
Top Products
EN 27
Manual Channel Set
Store channels that were not stored during Auto Set Up (੬ pg. 4)
or Auto Channel Set (੬ pg. 26).
SELECT TV SYSTEM
6
If you can see the picture
but hear no audio, set
"SYSTEM" to the appropri-
ate TV system (BG or DK
or I) by pressing PUSH
JOG %fi, then press OK.
● The CH section will
blink.
SELECT POSITION
7
Press NUMBER keys to
input an open channel
position in which you
want to store the detected
station (for a one-digit
number, enter "0" first).
Then press OK.
● To continue channel
search, press PUSH JOG
%fi to select "CON-
TINUE", then press OK.
Repeat steps 4 – 7 as
necessary.
● To set channels for other
bands, press PUSH JOG
%fi to select "BAND SELECT", then press OK to go
back to the Band Select screen. Repeat steps 3 – 7.
RETURN TO NORMAL
SCREEN
8
Press MENU.
ACCESS TUNER SET
SCREEN
1
Perform steps 1 – 3 of "Auto Channel Set" on page 26.
ACCESS MANUAL CH SET
SCREEN
2
Press PUSH JOG %fi to place the pointer next to
"MANUAL CH SET", then press OK.
SELECT BAND
3
Press PUSH JOG %fi to place the pointer next to the
band of your choice, then press OK to initiate Manual
Channel Set.
SET DESIRED STATION
4
The screen to the right
appears when a station is
detected. To store the
detected station, place the
pointer next to "STORE" by
pressing PUSH JOG %fi,
then press OK. If you do
not want to store the
station, press PUSH JOG %fi to place the pointer next
to "CONTINUE", then press OK. Channel search will
resume.
● The blueback screen and the TV picture currently
being broadcast appear alternately for 8 seconds
each.
PERFORM TUNING
5
For fine tuning adjustment,
press PUSH JOG %fi until
the picture becomes
clearer, then press OK.
● The SYSTEM section will
blink.
BAND SELECT
VHF L
VHF H
UHF
[
5
/∞] =
[MENU] : EXIT
MANUAL CH SET
PLEASE WAIT
VHF L 00MHZ
[MENU] : EXIT
STORE
CONTINUE
[5/
∞
] =
[MENU] : EXIT
MANUAL CH SET
CH FRQ SYSTEM
– – 350 BG
[5/
∞
] : FINE TUNING
: SELECT SYSTEM
[MENU] : EXIT
MANUAL CH SET
CH FRQ SYSTEM
– – 350 BG
[5/
∞
] : SELECT SYSTEM
: SELECT CH
[MENU] : EXIT
MANUAL CH SET
CH FRQ SYSTEM
– – 350 DK
[0–9] : INPUT CH
[MENU] : EXIT
CONTINUE
BAND SELECT
[
5
/∞] =
[MENU] : EXIT