JVC HR-J458EE VCR User Manual


 
14 EN
123
456
7
89
0
2
4
1
3
RECORDING
Basic
Recording
PLAY
PAUSE
STOP
RECORD
TV PROG
STOP/EJECT
PLAY
TV PROG
RECORD
NUMBER
TV signals being received by the recorder’s built-in tuner can be
recorded onto a video tape. You can “capture” a TV programme
using your video recorder.
Turn on the TV and select the VIDEO channel (or AV mode).
LOAD A CASSETTE
1
Insert a cassette with the record safety tab intact.
The counter is reset to 0:00:00 and the recorder
power comes on automatically.
Select the appropriate colour system by pressing the
COLOUR SYSTEM button.( pg. 24)
CHOOSE A PROGRAMME
2
Press TV PROG +/– or the NUMBER keys to select the
channel you wish to record.
SET TAPE SPEED
(HR-J458EE ONLY)
3
Press (SP/LP/EP). Check the SP/LP/EP indicator on
the recorder display panel to confirm the selected tape
speed.
START RECORDING
4
Press and hold RECORD and PLAY on the remote
control, or press RECORD on the recorder.
PAUSE/RESUME
RECORDING
5
Press PAUSE. Press PLAY to resume recording.
STOP RECORDING
6
Press STOP on the remote control or STOP/EJECT on
the recorder. Then press STOP/EJECT to remove the
cassette.
With HR-J458EE:
B.E.S.T. takes place at the beginning of both the
first SP and the first LP (or EP) recording after
inserting the cassette ( pg. 16).
With HR-J258/255EE:
B.E.S.T. takes place at the beginning of the first
recording after inserting the cassette ( pg. 16).
Recording Resume
Function
If there is a power outage during recording (or Instant Timer
Recording or timer recording), the recording will resume
automatically when power is restored to the recorder unless
the recorder's memory backup has expired.
To prevent accidental recording on a recorded cassette,
remove its safety tab. To record on it later, cover the hole
with adhesive tape.
Accidental erasure prevention
Record safety tab
SP/LP/EP
SP/LP/EP
PAUSE
COLOUR SYSTEM