JVC HR-J590 VCR User Manual


 
January 31, 2002 10:09 am Page 15
—15—
Master Page: Right
Connecting to a satellite receiver
Connect the decoder to the satellite receiver’s connector if you
have a decoder, EURO AV1 AUDIO/VIDEO connector to TV’s
connector, and EURO AV2 DECODER connector to the satellite
receiver’s connector. Then connect the satellite receiver and TV.
To record a programme via the satellite receiver, set the input
mode to “AV2” by pressing AV and/or PR+/–.
To receive a scrambled broadcast, descramble the signal with
the decoder.
For details, refer to the instruction manual for the satellite
receiver and decoder.
Connecting/Using a decoder
You can enjoy the variety of programming that is available through
scrambled channels.
A
Set “DECODER” to “ON”. (
5)
B
Connect the recorder’s EURO AV2 DECODER connector to the
decoder’s 21-pin SCART connector using a 21-pin SCART cable.
Connecting/Using a stereo system
(HR-J590/J593/J599EU only)
You can listen to the soundtrack through your stereo system.
Connect the AUDIO OUT L and R connectors on the recorder to
the AUX IN or TAPE MONITOR connectors on your stereo
system’s receiver or amplifier.
When listening to sound through the connected stereo system,
turn the TV’s volume down completely.
Child Lock
You can disable the recorder’s operations. While the recorder is
turned on, press . “SAFE” appears on the screen.
To release the child lock, press on the remote control until the
power indicator blinks on the display panel.
If any buttons on the recorder are pressed, “SAFE” appears on
the screen and the power indicator blinks on the display panel.
NOTES:
When the child lock function is in use, keep the remote control
out of the children’s reach.
Timer recording programs will be performed even if the child
lock function activated.
System Connections Subsidiary Settings
HR-J590_593_290_293EU-001EN.fm Page 15 Thursday, January 31, 2002 10:12 AM