Filter
Top Products
37
12
45
3
6
8
0
7
9
POWER
NUMBER
ENTER
CH
STOP
TV/CABLE/VCR
CABLE BOX BRAND NAME BRAND CODE
CURTIS 09, 10
GEMINI 08
GENERAL INSTRUMENTS 01, 02, 03, 04, 05, 06, 07, 08
HAMLIN 15, 16, 17, 18
JERROLD 01, 02, 03, 04, 05, 06, 07, 08
OAK 19, 20, 21
PANASONIC 24, 25, 26
PIONEER 13, 14
RCA 24, 25, 26
REGAL 15, 16, 17, 18
SUMSUNG 08, 13
SCIENTIFIC ATLANTA 09, 10
SIGMA 19, 20, 21
SL MARX 08, 13
SPRUCER 24, 25, 26
TELEVIEW 08, 13
TOCOM 22, 23
VIDEOWAY 11, 12
ZENITH 11, 12
Cable Box Multi-Brand
Remote Control
The VCR's remote control can control these functions on the
cable boxes listed below.
Some cable box brands have more than one code. If the cable
box will not function with one code, try entering another.
Before you start . . .
● Turn the cable box’s power on using its remote control.
● Set the TV/CABLE/VCR switch on your VCR’s remote control
to CABLE.
SET CABLE BOX BRAND
CODE
1
Refer to the chart below. While holding down POWER,
enter your cable box’s brand code using the NUMBER
keys, then press STOP.
● You don’t have to repeat this step until you replace
the remote control’s batteries.
TRY OPERATING CABLE BOX
2
Press POWER on the remote to turn off the cable box’s
power. If it goes off, try other operations.
● The POWER, CH
5
∞
and NUMBER keys on the
remote can all be used to operate the cable box.
*Depending on the brand, the cable box channel may
not change unless you press ENTER after having
pressed the NUMBER keys.
● To return the remote to VCR operation, set its TV/
CABLE/VCR switch to VCR.
NOTE:
Depending on the kind of cable box, there may be cases where
some or all functions cannot be operated using the remote
control.