Filter
Top Products
34
SUBSIDIARY SETTINGS (cont.)
Storing Channels Manually
To store channels that were not stored during Auto Set Up (੬ pg.
6) or Auto Channel Set (੬ pg. 32).
ACCESS MAIN MENU
1
Press MENU.
ACCESS CONFIRMATION
SCREEN
2
Press
%fi
to move the highlight bar (pointer) to
“MANUAL CH SET”, then press OK or . The Confir-
mation screen appears.
SELECT POSITION
3
Press
%
fi
until an
open position in which
you want to store a
channel begins blinking,
then press OK. The
Manual Channel Set
screen appears.
INPUT CHANNEL
4
Press the NUMBER keys to
input the channel number
you want to store.
● To input the registered
station name (ID – ੬ pg.
37), press until "– – –␣ –"
(ID setting) begins
blinking, then
press %
fi
.
● For fine tuning
adjustment, press
until "+/–" begins
blinking, then
press %
fi
.
While tuning, “+” or “–” appears.
ENTER NEW CHANNEL
INFORMATION
5
Press OK and the Confirmation screen appears.
● Repeat steps 3 through 5 as necessary.
CLOSE CONFIRMATION SCREEN
6
Press MENU.
● To change positions, see "Change Station Preset
Position" (੬ pg. 35).
● If you wish to set station names other than the ones
registered in your recorder, ੬ "Set Stations (B)" on
page 36.
%
ATTENTION
After you have stored channels manually, be sure to
perform Guide Program Number Set (੬ pg. 40) in order to
get proper results from Video Plus+ timer recording.
%
%
123
456
7
89
0
2
4
1
3
?
NUMBER
(Ex.) To store in position 6.
The blueback screen and the
programme currently being
broadcast by the selected channel
appear alternately for 8 seconds
each.
The blueback screen and the
programme currently being
broadcast by the selected channel
appear alternately for 8 seconds
each.
%
%
5
5
PR CH ID PR CH ID
01 26 BBC1 08 ––––
02 33 BBC2 09 ––––
03 23 ITV 10 ––––
04 30 CH4 11 ––––
05 37 CH5 12 ––––
06 –––– 13 ––––
07 –––– 14 ––––
[
5∞ ]
=
: EDIT
= [X] : DELETE
[MENU] : EXIT
PR CH ID FINE
06 CH21 –––– +/–
[0–9] : SELECT
[ ] : CURSOR +=
: OK
[MENU] : EXIT
∞
∞
MENU
OK