Filter
Top Products
It may be unlawful to record or play back copyrighted
material without the consent of the copyright owner.
Load a cassette
Make sure the record safety tab is
intact. If not, cover the hole with
adhesive tape before inserting the
cassette.
• The VCR turns on, and the counter
is reset, automatically.
Set tape speed
Press SP/EP.
Select recording channel
Press CH–/+ or the Number keys on
the Remote [CH–/+ on the VCR].
1
2
Start recording
On the VCR, press REC. Or on the
Remote, while holding REC, press
PLAY (
).
3
4
OR Press STOP/EJECT
(■/ ) on the VCR.
Press STOP (
) on the
Remote.
Press PAUSE.
• Press PAUSE to resume recording.
• You can select channel in the
recording pause mode.
Adjusting tracking condition
– Tracking Adjustment
Automatic tracking adjustment
Whenever you insert a tape and start playback, automatic
tracking starts working and continuously analyzes the signal
to enable optimum picture quality during playback.
Manual tracking adjustment
If automatic tracking cannot eliminate noises well during
playback, press SET –/+ on the Remote to eliminate the
noises. Press it briefly for a fine adjustment, or press and
hold for a coarse adjustment.
•
Press SP/EP on the Remote to reactivate automatic tracking.
Playing back tape repeatedly
– Auto Repeat Play
Access Menu screen
Press MENU on the Remote.
Press SET –/+ to select “AUTO
REPEAT”.
〈+/–/ENTER/MENU〉
MENU
CLOCK SET
TIMER REC SET
ON OFF
ON OFF
AUTO REPEAT
CH SET UP
SAP
LANGUAGE/IDIOMA/LANGUE
ON OFF
NO NOISE BACKGROUND
〈+/–/ENTER/MENU〉
MENU
CLOCK SET
TIMER REC SET
ON OFF
ON OFF
AUTO REPEAT
CH SET UP
SAP
LANGUAGE/IDIOMA/LANGUE
ON OFF
NO NOISE BACKGROUND
1
Select ON/OFF
Press ENTER to select “ON” or
“OFF”.
Press MENU to return to normal
screen.
2
Start Auto Repeat Play
Press PLAY. The tape will play
over and over until the repeat
mode is canceled.
3
Playback Features
Recording
Accidental erasure prevention
To prevent accidental recording on a recorded
cassette, remove its record safety tab.
To record on it later, cover the hole
with adhesive tape.
Record safety tab
Basic Recording
00 : 00 : 00 SP
• If you connect the TV and the VCR
only using the RF connection, press
TV/VCR on the Remote so that the
VCR mode indicator lights on the display panel, to view the
program to be recorded.
CH 001
CH 110
During recording
Pause recording
Stop recording
– Playback –
4F22001AE 08-Back 16/01/2002, 19:068