Filter
Top Products
45
ENTREE
ANT. IN
ENTREE/DECODEUR
IN/DECODER
AV2
ENTREE/SORTIE
IN/OUT
SORTIE
RF OUT
ANTENNE
AV1
SORTIE
OUT
R
L
AUDIO
1
6
3
4
2
5
4 AV1 IN/OUT Connector enables AV connection to
TV or second recorder; input recordable when "L-1"
selected.
☞
pg. 5, 24
5 AUDIO OUT (L/R) Connectors enable connection of
audio cassette recorder, TV or second video recorder
for dubbing.
☞
pg. 29
6 RF. OUT Connector enables connection to aerial
terminal of TV receiver.
☞
pg. 5
1 Mains Power Cord supplies power to recorder.
☞
pg. 5
2 ANT. IN Connector enables connection of aerial.
☞
pg. 5
3 AV2 IN/DECODER Connector enables connection of
satellite receiver or second recorder; input recordable
when "L-2" selected.
☞
pg. 22, 24
REAR VIEW
DISPLAY PANEL
1 B.E.S.T. Picture System Display lights from bottom to
top while B.E.S.T. is active.
☞
pg. 18
2 Symbolic Mode Indicators
3 Tape Speed Indicators display mode of recording; light
during Record or Play mode.
☞
pg. 10
* EP is only for NTSC playback.
4 Programme Time Indicators show the programme
start time (
) and the programme stop time ( ) for
timer-recording.
☞
pg. 14
5 "Timer" Indicator lights when has been pressed to
engage Timer mode.
☞
pg. 13, 15
6 Tape Remaining Time Indicator displays time remaining
on tape when certain buttons are pressed.
☞
pg. 11
7 Channel Display shows preset position where the
station currently being received is stored.
Clock Display shows current time.
☞
pg. 7
8 Instant REVIEW Indicator blinks after timer-recording
and shows how many programmes have been timer-
recorded.
☞
pg. 17
9 PDC Indicator lights when PDC has been engaged
for timer recording.
☞
pg. 13, 15
* VPS (Video Programme System) recording is not currently
available in the U.K. and not possible with this recorder.
0 VCR Indicator lights when the video recorder is in
the video mode. At this point, the TV automatically
enters AV mode.
☞
pg. 8
! "Cassette Loaded" Mark lights once a cassette is
inserted; remains lit until cassette ejected.
@ Counter shows time elapsed since playback or
recording began.
With
displayed, shows time remaining from
current tape position to end of tape (
☞
pg. 11).
Counter, Preset Position*, Clock and Tape Remaining
Time Display appear alternately when DISPLAY
(or – –:– –) is pressed.
* Preset Position is not displayed during playback.
# Mode shows external input mode selected (L-1, L-2 or
F-1).
STILL:
SLOW:
RECORD:
RECORD PAUSE:
PLAY:
FF/REW VARIABLE
SHUTTLE SEARCH:
REVIEW
SP
9
!
@
#
2 7 81 3 5 64
VPS/PDC
VCR
0