JVC HR-J755EK VCR User Manual


 
51
w WEEKLY Button enables timer recording of
weekly serials. pg. 13, 15
e AUX Button selects recorder's auxiliary input
mode. pg. 28
r Button engages timer-standby mode. pg. 13,
15
t DATE +/– Button inputs date of programme for
timer recording. pg. 14
y TV PROG +/– Button — same as button on
recorder. pg. 10
u 30 SEC Button initiates a 30-second period of
fast-motion playback. pg. 18
i Auto Tracking Button enables/disables auto
tracking mode during playback pg. 17
SP/LP Button selects tape speed. pg. 10
o Play Button — same as button on recorder.
pg. 8, 9
p Fast Forward [FF] Button fast-forwards tape pg.
8; initiates high-speed forward search. pg. 9
Q Pause Button — same as button on recorder.
pg. 9
W OK Button enters selections made in on-screen
menus. pg. 20
E Button initiates functions such as Index
Search pg. 18, variable-speed search, frame
by frame playback. pg. 9
TV +/–Button controls volume of connected
TV. pg. 26
How To Use
The remote control can operate most of your video recorder's
functions, as well as basic functions of TV sets and satellite
receivers of JVC and other brands. pg. 26, 27.
Point the remote control toward the sensor window.
The maximum operating distance of the remote control
is about 8 m.
NOTES:
When inserting the batteries, be sure to insert in the
correct directions as indicated under the battery cover.
If the remote control doesn't work properly, remove its
batteries, wait a short time, replace the batteries and then
try again.
%
%
ATTENTION
The remote control can operate not only the video recorder but also some of your TV and satellite receiver's functions.
To operate your video recorder, first press the VCR button to set the remote control to the Video mode.
To operate your TV, first press the TV button to set the remote control to the TV mode ( pg. 26).
To operate your satellite receiver, first press the SAT button to set the remote control to the Satellite Receiver mode ( pg. 27).