JVC HR-J770EK VCR User Manual


 
55
^ STANDBY/ON Button — same as button on
recorder.
& AUDIO Button changes output sound mode.
pg. 25
(TV Muting) Button mutes sound of
connected TV. "Operating JVC TVs" in the
right column.
* – –:– – (Display) Button switches display
between clock time, tape remaining time,
counter readings and preset position*. pg. 15
* Preset position is not displayed during playback.
( DAILY Button enables timer recording of daily
serials. pg. 17, 19
) WEEKLY Button enables timer recording of
weekly serials. pg. 17, 19
q AUX Button selects recorder's auxiliary input
mode. pg. 30, 31
w (TIMER) Button — same as button on re-
corder. pg. 17, 19
e DATE +/– Button inputs date of programme for
timer recording. pg. 18
r PR +/– Button — same as button on recorder.
pg. 14
t Auto Tracking Button ( ) enables/disables
auto tracking mode during playback pg. 28
SP/LP Button selects tape speed. pg. 14
y 30 SEC Button initiates a 30-second period of
fast-motion playback. pg. 24
u Play Button — same as button on recorder.
pg. 12, 13
i Fast Forward [FF] Button fast-forwards tape;
initiates forward high-speed search. pg. 12, 13
o Pause Button — same as button on recorder.
pg. 13, 14
p OK Button enters selections made in on-screen
menus. pg. 9
Q
@ #
Button initiates functions such as Index
Search pg. 24, variable-speed search, frame
by frame playback. pg. 13
TV +/– Button controls volume of connected
TV. "Operating JVC TVs" in the right
column.
How To Use
The remote control can operate most of your video recorder's
functions, as well as basic functions of JVC TV sets. (See
below.)
Point the remote control toward the sensor window.
The maximum operating distance of the remote control
is about 8 m.
Operating JVC TVs
To operate your TV, while holding down the TV button,
press the corresponding button: STANDBY/ON , TV/
VCR, TV PR +/–, TV +/–, (TV Muting).
NOTES:
When inserting the batteries, be sure to insert in the
correct directions as indicated under the battery cover.
Depending on the type of JVC TV, there may be cases
where some or all functions cannot be operated using the
remote control.
If the remote control doesn't work properly, remove its
batteries, wait a short time, replace the batteries and then
try again.