Filter
Top Products
Masterpage:Left
28
EN
TIMER RECORDING (cont.)
24 Hour Express
Timer Programming
NOTES:
● You can programme this recorder to timer-record as many as
8 programmes. If you try to programme the recorder to record
a ninth, “PROGRAM FULL” appears on the TV screen and
“FULL” appears on the front display panel. To record the extra
programme, you must first cancel any unnecessary
programmes (
੬
pg. 29).
● It is not possible to timer-record a satellite broadcast received
on the channel position “0” by the satellite receiver.
● If “Err” appears on the front display panel, repeat the above
steps again.
● When a menu screen is shown, you cannot use 24 Hour
Express Timer Programming function. Press
MENU
to return to
normal screen, and try again.
● You can use 24 Hour Express Timer Programming function also
when the recorder is turned off.
● For 24 Hour Express Timer Programming function, the
program overlap warning display does not appear even if some
programs overlap each other. The programme with the lower
programme number will be recorded and the other one will
not be recorded correctly.
You can programme a timer recording that starts within 24 hours
using the JOG dial on the recorder.
A
Enter the programme mode.
Press
24H EXPRESS
#
on the recorder. The start time
indicator ( ) starts blinking on the front display panel.
B
Set the programme start/stop time and
channel.
Turn the
JOG
dial to the left or right to set the time you
want recording to start.
● One click stop of the JOG dial changes the time in 5-minute
intervals.
Push the
JOG
dial. The stop time indicator ( ) starts
blinking on the front display panel. Turn the
JOG
dial to
the left or right to set the time you want recording to stop.
Push the
JOG
dial. Turn the
JOG
dial to the left or right to
select the channel you wish to record.
● You can cancel the setting at any time by pressing and holding
the
JOG
dial for more than 3 seconds. Repeat the step
2
.
C
Engage the recorder’s timer mode.
Press
24H EXPRESS
#
. The recorder turns off
automatically and
#
appears on the front display panel.
● To disengage the timer mode, press
#
(
TIMER
) again.
Before performing the 24 Hour Express Timer
Programming:
● Make sure that the recorder’s built-in clock is set properly.
● Insert a cassette with the safety tab in place. The recorder
will come on automatically.
● Turn on the TV and select the video channel (or AV mode).
HRJ780EU2.fm Page 28 Tuesday, December 19, 2000 1:31 PM