Filter
Top Products
15
Troubleshooting
Troubleshooting
About Head cleaning
8
If the picture playback becomes blurred, it does not mean that the recorded program has
been erased.
8
Dirt accumulated on the video heads after long periods of use causes such troubles. In this
case, head cleaning requiring highly technical care is necessary.
8
For head cleaning, consult the nearest JVC dealer.
Problem Check point
No power Is the power cord plugged in?
Is the power turned on?
Tape cannot be ejected Was the video cassette player’s
¤
button or the
0
EJECT button on the remote control pressed?
No picture Is the TV set to the video channel?
Is a cassette loaded?
Are the connections correct?
No colour Set the Colour System Output switch according to
the recorded tape system.
Shuttle search does not function Is the video cassette player in the playback
mode?
Disturbances in playback picture Is tracking adjusted properly?
Is the TV adjusted properly?
Install this VCP a little way apart from the TV set.
Remote control does not function The batteries are weak.
Replace the batteries.
Auto playback does not function The video cassette’s recording safety tab has
not been removed.
Recording does not function Are the connections correct?
Was the Record button pressed?
The video cassette’s recording safety tab is removed.
The video cassette player does not
function properly
Microcomputer malfunction.
Disconnect the power plug from the AC outlet and
then re-insert it.
The microcomputer will be reset to its initial mode.
HRP110.book Page 15 Tuesday, August 3, 2004 4:51 PM