Filter
Top Products
9
SP/LP/EP
NTSC
PLAYBACK
ON PAL TV
NTSC4.43
NTSC3.58
STANDBYOPERATE
LP/EP
B.E.S.T.
B.E.S.T.
O
MADE IN JAPAN
HR-P128
1
2
Use the following procedure to record TV programmes on a
blank video tape.
Before proceeding:
• To record TV programmes, the video cassette player must
be connected to the TV as shown in connection B of the
“Connections” section.
• Turn on the power of the TV and video cassette player.
• Make sure that the video cassette’s safety tab is intact. If it
has been removed, cover the hole with adhesive tape.
Recording
1
2
Load a blank video tape.
Press the Record
¶¶
¶¶
¶ button to start recording. (On the
remote control unit press the Record
¶¶
¶¶
¶ and Play
33
33
3
buttons at the same time.)
The recording indicator will light during recording.
7 Press the Stop/Eject § button or the remote control’s
Stop
77
77
7 button to stop recording.
To stop recording temporarily:
7 Press the Pause 8 button.
The recording indicator will blink.
Press the Play 3 button to resume recording.
Notes:
• To engage recording standby, press the Record ¶ button
and then press the Pause 8 button. The recording indicator
will blink during recording standby. Press the Play 3 button
again to start recording.
• If the Record ¶ button does not work, check to see if the
cassette safety tab has been removed.
• The player automatically stops when record-standby
continues for more than 5 minutes.
• The video tape will be rewound automatically when the end
of the tape is reached.
-
TVCH +
-
VOLUME
+
TV/VIDEO
AUTO
-
TRACKING
+
TV/VIDEO
OPERATE
VIDEO
OPERATE
REMOTE CONTROL UNIT
+
-
(
L[J
+
(
TV
2
Tracking adjustment
Automatic tracking is adjusted each time a cassette is inserted
in the video cassette player, you may wish to adjust tracking
manually during playback.
Manual tracking
Press the remote control’s AUTO button.
Press the remote control’s TRACKING + or – button to
adjust tracking.
7 Press the AUTO button to return to automatic tracking.
Notes:
• Tracking may need to be adjusted each time a different video
tape is inserted for playback.
• Tracking will be automatically set to the reference position
when the cassette is ejected.
Playback features (cont’d)
2
1