Filter
Top Products
38 EN
PLAYBACK AND RECORDING FEATURES (cont.)
Time Scan
Your VCR is equipped with the TimeScan function. TimeScan
allows noise free pictures to be displayed on your TV screen in
the forward and reverse search modes. Audio will be played
back at normal speed during any of the TimeScan modes (੬
pg. 39). TimeScan allows you to view a program in search mode
while listening to the audio.
NOTES:
●
"TIMESCAN AUDIO" must be set to "ON", or the sound will
not be heard in TimeScan mode (
੬
pg. 40).
●
The audio will not synchronize with the video in TimeScan
modes.
●
In Pause mode 3 seconds (approx.) of audio will be played
back repeatedly. (
੬
pg. 24)
●
In TimeScan search modes some of the audio information will
not be played so that the audio can keep up with the video.
ACTIVATE VARIABLE-SPEED
SEARCH
1
During playback or still, turn the VCR's TIME SCAN
SHUTTLE ring. It remains at that position even after you
release it. Each time it passes a click position, the
playback speed changes.
(Refer to the chart on pg. 39 for playback speeds).
OR
During playback, repeatedly press and TIME SCAN
™ or £ to select the search speed.
● To increase the speed in the forward direction, press
and release £ repeatedly to select the various
forward search modes.
● To decrease the speed in the forward direction, press
and release ™.
● To play in reverse slow motion and in reverse play
mode, continue to press ™ repeatedly after
selecting all the forward slow motion modes.
(Refer to the chart on pg. 39 for playback speeds).
To resume normal playback, press PLAY.
123
456
7
89
0
2
4
1
3
TIME SCAN
Variable-Speed Search/
Reverse Motion Playback
PLAY
PLAY
TIME SCAN SHUTTLE
Audio signal during TimeScan
Playback tape ➀➁➂➃➄
Sound of ➀, ➂ and ➄ is heard.
Sound of ➁ and ➃ is not heard.
Output audio signal is normal (monaural) sound.
● If the picture jitters vertically during variable-speed search:
1 Press PAUSE.
2 Press CH
5
(+) or
∞
(–) so that the vibration stops.
● If the superimposed indication jitters vertically during
TimeScan, adjust until the optimum condition is achieved
by using manual tracking (੬ pg. 25).