JVC HR-S5963E VCR User Manual


 
February 14, 2003 10:44 am Page 10
—10—
Master Page: Right
Editing with another video recorder or a
camcorder
You can use your recorder as the source player or the recording
deck. You can use a camcorder as the source player and your
recorder as the recording deck. Refer also to the other
components’ instruction manuals for connection and its
operations.
A
Make connections
Connection with another video recorder
If another recorder is compatible with the Y/C signal…
… When using your recorder as the source player, set “L-1
OUTPUT” to “S-VIDEO” in “Output/Input Set”.
… When using your recorder as the recording deck, set “L-2
INPUT” to “S-VIDEO” in “Output/Input Set”.
Connection with a camcorder
Connect the camcorder’s AUDIO/VIDEO OUT connectors to the
recorder’s L-1 IN/OUT or L-2 IN/DECODER connector via a cable
adapter.
B
Load cassettes
Insert the playback cassette into the source player and the cassette
to be recorded on into the recording deck.
C
Select input mode on recording deck
Select the correct external input on the recording deck. On this
recorder, press
AUX
and/or
PR
r
/
t
on the remote control or
PR+/–
on the recorder.
Select “L-1” for the L-1 IN/OUT connector, or “L-2” for the L-2 IN/
DECODER connector.
When using the L-2 IN/DECODER connector, set “L-2 SELECT”
to “A/V” in “Output/Input Set”.
D
Select edit mode
Select the appropriate edit mode for the components if such a
mode is equipped.
On this recorder, set “PICTURE CONTROL” to “EDIT”. (
12)
E
Start playback
Engage the Play mode of the source player.
F
Start recording
Engage the Record mode of the recording deck.
L-1 OUTPUT Setting:
The L-1 IN/OUT connector accepts only a composite signal
(regular video signal) and delivers either a composite signal
(regular video signal) or a Y/C signal (a signal in which the
luminance and chrominance signals are separated). Set “L-1
OUTPUT” to the appropriate mode depending on the type of
appliance connected to the recorder’s L-1 IN/OUT connector.
L-2 SELECT and L-2 INPUT Setting:
The L-2 IN/DECODER connector accepts either a composite
signal (regular video signal) or a Y/C signal (a signal in which the
luminance and chrominance signals are separated). Set “L-2
SELECT” to the appropritate mode depending on the type of
appliance connected to the recorder’s L-2 IN/DECODER
connector. Set “L-2 INPUT” to the appropriate mode depending
on the output signals of the connected appliance.
NOTES:
If you have a satellite receiver or a decoder connected to the L-2
IN/DECODER connector, be sure to set “L-2 SELECT” back to
appropriate mode after editing.
If you are not connecting a satellite receiver or a decoder to the
L-2 IN/DECODER connector, leave “L-2 SELECT” set to “A/V”.
When “L-2 SELECT” is set to “SAT”, “SAT” or “SAt” appears on
TV screen or front display panel instead of “L-2” or “L2”.
If “L-2 SELECT” is set to “DECODER”, it is impossible to set “L-2
INPUT” to “S-VIDEO”.
If “L-1 OUTPUT” is set to “S-VIDEO”, it is impossible to set “L-2
SELECT” to “DECODER”.
A
Access the Main Menu, then Output/Input Set screen
Press MENU. Press rt to move the
highlight bar (pointer) to “OUTPUT/
INPUT SET”, then press OK or e.
B
Select the output or input mode for
the connectors
Press rt to move the highlight bar
(pointer) to the desired mode. Then,
press OK or e to select the appropriate
setting. The default setting is bold in the
table below.
Press MENU to return to normal screen.
L-1 OUTPUT VIDEO / S-VIDEO
VIDEO: If a connected appliance’s input is compatible only with
regular video signals, set to “VIDEO”.
S-VIDEO: If a connected appliance’s input is compatible with Y/C
signals, set to “S-VIDEO”. You can obtain high-quality S-VHS
picture. (For connection, be sure to use a 21-pin SCART cable that
is compatible with the Y/C signal.)
L-2 SELECT A/V / DECODER / SAT
A/V: To use this recorder as the recording deck with the player
connected to the L-2 IN/DECODER connector, or to use the
satellite receiver connected to the L-2 IN/DECODER connector.
DECODER: To use a decoder connected to the L-2 IN/DECODER
connector.
SAT: To view a satellite programme with the TV set while the
recorder is turned off. (
11)
Editing
Your recorder
Another recorder
L-2 IN/DECODER or
L-1 IN/OUT
To L1 IN/OUT
When using your
recorder as the
recording deck,
connect its L-2 IN/
DECODER or L-1 IN/
OUT connector to the
source player.
When using your
recorder as the source
player, connect its L-1
IN/OUT connector to
the recording deck.
21-pin
SCART cable
(not
provided)
Output/Input Set
L-1 OUTPUT VIDEO
L-2 SELECT A/V
L-2 INPUT VIDEO
HR-S5960.5961_001EN.fm Page 10 Friday, February 14, 2003 10:45 AM