Filter
Top Products
advanced features52
Clock Set
You should only need to perform this function if:
• Auto Clock Set was not performed correctly by Auto Setup, Preset Download or Auto Channel
Set
• The VCR’s memory backup has expired
• You want to change the Just Clock setting
Setting the Clock
get to the initial set screen Press . Move the highlight bar to INITIAL SET using the
PR
and
PR
buttons and press (or E).
get to the clock set screen Move the highlight bar to CLOCK SET using the
PR
and
PR
buttons and press (or E).
set time and date When the CLOCK SET screen appears, the time will be blinking. Use the
PR
and
PR
buttons to set the correct time (pressing and holding will
advance the time in 30minute increments) and then press
(or E). The date will blink. Use the
PR
and
PR
buttons to
set the correct date (pressing and holding will advance the date in
15day increments) and then press
(or E). Set the correct
year in the same way and press
.
set just clock Set as desired using the
PR
and
PR
buttons
then press
(or E).
set preset for clock data source If you have set JUST CLOCK to ON, you will need to
specify a preset (station) for JUST CLOCK to take its source data from. Use the
PR
and
PR
buttons to select the preset and press (or E).
start clock operation Press .
NOTE:
If the recorder’s memory backup has expired or the AC was disconnected from the recorder, the
recorder will automatically perform Auto Clock Set when the power is restored.
Notes on Just Clock
Some TV stations transmit a time signal with their broadcasts. This VCR has the ability to use
this signal to update its internal clock (including the adjustment for British Summer Time). It will
do this every hour except for 23:00, 00:00, 01:00 and 02:00. By setting Just Clock to
ON, you are
enabling the VCR to do this.
Just Clock is not effective in the following circumstances:
• when the VCR is powered on
• when the VCR is in Timer or Auto Satellite Programme Recording modes
• when a difference of more than 3minutes between the internal clock and the time signal exists.
• when reception conditions are poor.
[1] a k
[MENU]: EXIT
CLOCK SET
TIME DATE YEAR
0: 00 01 . 01 03
JUST CLOCK : ON
TV PR. : 1
HR-S5965/5966EK-EN/p52-59 2/19/03, 04:12 PM52