Filter
Top Products
advanced features 43
Auto Timer
When the AUTO TIMER is set to ON, the timer is automatically engaged when the VCR power is
turned off and automatically disengaged when the VCR is powered back on.
get to the mode set screen Press MENU button. Move the
highlight bar to MODE SET using the PR and PR buttons
and press OK button (or ).
enable/disable auto timer Select AUTO TIMER using the PR
and PR buttons and press OK button (or ) to toggle
between
ON and OFF.
return to normal screen Press MENU button.
Auto Power Off/3H
When this function is set to “3H”, the recorder is turned off
automatically if no operation is done within 3 hours. “AUTO
POWER OFF IN 3 MIN” appears on the screen 3 minutes before
the recorder is turned off.
get to the mode set screen Press MENU button. Move the
highlight bar to MODE SET using the PR and PR buttons
and press OK button (or ).
select auto power mode Move the highlight bar to AUTO
POWER
using the PR and PR buttons. Press OK button (or
) to select
3H or OFF.
return to normal screen Press MENU button.
Repeat Playback
start repeat playback Press ., then press and hold . again for over 5 seconds, then release.
The Play indicator (
#) will flash on the display panel and the VCR will automatically playback
and rewind the tape 100 times and then stop.
stop playback Pressing S, ., < or > stops repeat playback.
Next Function Memory
play To playback immediately after rewinding, press < and then . within 2seconds.
power off To power off the VCR immediately after rewinding, press < and then o
within 2seconds.
timer standby To put the VCR in timer standby mode immediately after rewinding, press
< and then c within 2seconds.
[1] a k
[MENU]: EXIT
MODE SET
S-VHS ET OFF
B.E.S.T. ON
PICTURE CONTROL AUTO
AUTO TIMER OFF
O.S.D. ON
AUTO SP a LP TIMER OFF
POWER SAVE OFF
NEXT PAGE
F
[1] a k
[MENU]: EXIT
MODE SET
PREVIOUS PAGE
VIDEO STABILIZER OFF
S-VHS ON
AUTO POWER OFF 3H
F
HR-S5975/5977EK-EN/p41-45 3/6/04, 11:21 AM43