advanced features52
Clock Set
You should only need to perform this function if:
• Auto Clock Set was not performed correctly by Auto Setup, Preset Download or Auto Channel
Set
• The VCR’s memory backup has expired
• You want to change the Just Clock setting
Setting the Clock
get to the initial set screen Press MENU button. Move the highlight bar to INITIAL SET
using the PR and PR buttons and press OK button (or ).
get to the clock set screen Move the highlight bar to CLOCK SET using the PR and
PR buttons and press OK button (or ).
set time and date When the CLOCK SET screen appears, the time will be blinking. Use the
PR and PR buttons to set the correct time (pressing and holding will advance the time in
30minute increments) and then press OK button (or ). The
date will blink. Use the PR and PR buttons to set the
correct date (pressing and holding will advance the date in 15day
increments) and then press OK button (or ). Set the correct
year in the same way and press OK button.
set just clock Set as desired using the PR and PR
buttons then press OK button (or ).
set preset for clock data source If you have set JUST
CLOCK
to ON, you will need to specify a preset (station) for JUST
CLOCK
to take its source data from. Use the PR and PR buttons to select the preset and
press OK button (or ).
start clock operation Press MENU button.
NOTE:
If the recorder’s memory backup has expired or the AC was disconnected from the recorder, the
recorder will automatically perform Auto Clock Set when the power is restored.
Notes on Just Clock
Some TV stations transmit a time signal with their broadcasts. This VCR has the ability to use
this signal to update its internal clock (including the adjustment for British Summer Time). It will
do this every hour except for 23:00, 00:00, 01:00 and 02:00. By setting Just Clock to
ON, you are
enabling the VCR to do this.
Just Clock is not effective in the following circumstances:
• when the VCR is powered on
• when the VCR is in Timer or Auto Satellite Programme Recording modes
• when a difference of more than 3minutes between the internal clock and the time signal exists.
• when reception conditions are poor.
[1] a k
[MENU]: EXIT
CLOCK SET
TIME DATE YEAR
0: 00 01 . 01 03
JUST CLOCK : ON
TV PR. : 1
HR-S5975/5977EK-EN/p52-59 3/6/04, 11:23 AM52