Filter
Top Products
Masterpage:Right-NoTitle0
EN
31
Filename [HRS6850EU2.fm]
Page 31 April 12, 2001 9:59 am
Check, cancel and change programmes
A
Disengage the timer mode.
Press
#
(
TIMER
), then press
1
.
B
Access the Programme Check screen/display.
C
Access the Programme screen/display.
The front display panel shows the programme start time. Pressing
OK
changes the display to the programme stop time, then the
date and the channel position.
To cancel or change a programme...
D
Cancel or change a programme.
Press
&
to cancel a programme. To change programme
settings, press the appropriate button:
START+/–
,
STOP+/–
,
DATE+/–
,
PR+/–
,
VPS/PDC
and/or
SP/LP/EP
(
p
).
● You can change “TV PROG” to “SAT” for the channel position
by pressing the
number key
“
0
”.
● If you do not want to edit the programme title, skip steps
5
and
6
.
E
Access the Title Edit screen.
F
Enter the programme title.
G
Return to the normal screen/display.
Press
"
as many times as necessary. If there are still
some programmes remaining, go on to step
8
.
H
Return to the timer mode.
Press
#
(
TIMER
).
NOTE:
You can also check the programmes on the front display panel
even if the recorder’s power is off (unless the recorder is in the
Power Save mode
੬
pg. 49) or the recorder is in the Timer
mode; however, it is not possible to cancel or change the
programmes.
Press
"
.
Press
"
again to check
more information. Each time
you press
"
, the next
programme’s information
appears.
Press the
number key “1”
.
The Title Edit screen appears.
● You can access the title edit
screen only when “PROG.
NAVIGATION” is set to “ON”.
(
੬
pg. 48)
Press the
number keys
and
e
to enter characters, then
press
OK
. For details, refer to
“Entering Character” on
page 37.
HRS6850EU1.book Page 31 Thursday, April 12, 2001 10:16 AM