JVC HR-S6950EU VCR User Manual


 
Filename [HRS6950EU2-EN.fm]
Masterpage:Left
26
EN
Page 26 March 5, 2002 2:32 pm
TIMER RECORDING
S
HOW
V
IEW
®
Timer
Programming
With the S
HOW
V
IEW
system, timer programming is greatly
simplified because each TV programme has a corresponding
code number which your recorder is able to recognize.
A
Access the S
HOW
V
IEW
screen.
The front display panel looks like this:
B
Enter the S
HOW
V
IEW
number.
The S
HOW
V
IEW
number you enter appears on the front display
panel with only a 4-digit number:
C
Access the S
HOW
V
IEW
Program screen.
The front display panel shows the programme number. Pressing
"
changes the display to the programme start time, the stop
time, the date, the tape speed then the channel position.
If the number you entered is invalid, “ERROR” appears on the
TV screen and “Err” appears on the front display panel. Press
&
and input a valid S
HOW
V
IEW
number.
If the “GUIDE PROG SET” screen appears, see “ATTENTION”
on page 27.
Before performing the S
HOW
V
IEW
Timer
Programming:
Make sure that the recorder’s built-in clock is set properly.
Insert a cassette with the safety tab in place. The recorder
will come on automatically.
Turn on the TV and select the video channel (or AV mode).
Press
PROG
.
Press the
number keys
to
enter the S
HOW
V
IEW
number
of a programme you wish to
record.
If you make a mistake, press &
and input the correct number.
Press
OK
and the S
HOW
V
IEW
Program screen appears (if
you’re just starting out, “P1”
appears).
IMPORTANT
Make sure the channel position number you wish to record is
displayed; if not, see “S
HOW
V
IEW
®
System Setup” on page 51
and set the Guide Program number correctly.
HRS6950EU1-EN.book Page 26 Tuesday, March 5, 2002 2:39 PM