Filter
Top Products
Page 9 May 2, 2003 10:12 am
— 9 —
Automatic operations after rewinding
— Next Function Memory
The Next Function Memory “tells” the VCR what to do after
rewinding is complete. Ensure that the VCR is in stop mode.
● For Automatic Playback Start
Press REW (
3
),
then press PLAY (4) within 2 seconds.
● For Automatic Power Off
Press REW (
3
),
then press 1 within 2 seconds.
● For Automatic Timer Standby
Press REW (
3
),
then press TIMER within 2 seconds.
NOTE:
It is not possible to select the Automatic Timer Standby function if
the cassette’s record safety tab is removed.
Playing back tape repeatedly (100 times)
— Repeat Play
During playback, press and hold PLAY (4) for more than
5 seconds. The play indicator (
$) on the display panel starts
blinking slowly. To stop playback, press STOP (
8) on the Remote
or STOP/EJECT (
0) on the VCR.
NOTE:
Pressing PLAY (4), REW (
3
),
FF (5) or PAUSE (9) also
cancels repeat playback.
Locating beginning of recordings
— Index Search
Index codes are placed on the tape at the beginning of each
recording when recording on this VCR.
A While the tape is not running, press w or e (2 or
6
)
on
the Remote to start search.
B To access a recording of 2 to 9 index
codes away, press
w or e (2 or
6
)
repeatedly until the correct
number is displayed on the screen
(only if “SUPERIMPOSE” is set to
“ON”)(
੬ pg. 13). Playback begins
automatically when the desired
recording is located.
Locating beginning of timer recordings
— Instant Review
After ensuring that the VCR is turned off and that the timer mode
is disengaged, press REVIEW on the Remote.
● The VCR turns on, and rewinds to the index code indicating the
beginning of the last timer-recorded program, then begins
playback automatically.
● You can access a program of 2 to 9 index codes away from the
current position on the tape. If, for example, you have
5 programs recorded and you want to watch the third one, press
REVIEW three times.
● The Instant Review function will also operate if the VCR is
turned on.
Skipping unwanted portions
— Skip Search
Press SKIP SEARCH on the Remote once to 4 times during
playback. Each press initiates a 30-second period of high speed
playback (up to 2 minutes). When the specified portion of the tape
is skipped, normal playback resumes automatically. To return to
normal playback during Skip Search, press PLAY (
4).
INDEX 1
2nd next
Beginning of the
current program
recorded
Current
position on
the tape
Beginning of the
2nd next program
recorded
Previous
program
recorded
Next
program
recorded
– Playback –
HR-S8010UM-EN.fm Page 9 Friday, May 2, 2003 10:12 AM