Filter
Top Products
42
7 8 9
3
4
1
2
3
4
0
ADVANCED OPERATIONS (cont.)
This function makes it easier to create edited videos when your
video recorder is used as the source player in combination with
another JVC video recorder equipped with a Remote PAUSE
Connector. You can pre-program up to 8 scenes or “cuts” for
automatic editing in the sequence you have specified.
You can also perform Random Assemble Editing with a second
non-JVC recorder. (੬ pg. 43)
Random As-
semble Editing
MAKE CONNECTIONS
1
Connect your recorder’s AV1 IN/OUT or S OUT/
AUDIO OUT connectors to the VIDEO IN and AUDIO
IN connectors on the recording deck, and connect your
recorder’s PAUSE/R.A. EDIT connector to the PAUSE
connector on the recording deck.
● If the recording deck doesn’t have a PAUSE connec-
tor, connect to the R.A. EDIT connector instead.
● The Mini-plug cable is a mono 3.5 mm mini-plug to
mono 3.5 mm mini-plug connector.
PREPARE FOR EDITING
2
Insert the cassette to be recorded on into the recorder
and set the recorder's input mode.
LOAD SOURCE CASSETTE
3
Insert the source cassette into your recorder.
SET EDIT MODE
4
See "Picture Control" on page 35.
START SOURCE PLAYBACK
5
Press PLAY.
ACCESS MAIN MENU
SCREEN
6
Press MENU.
ACCESS R.A. EDIT SCREEN
7
Press %fi to move the highlight bar (pointer) to "R.A.
EDIT", then press OK.
● The screen is superimposed on the video playback in
step 8.
8
PAUSE/
R.A. EDIT
REMOTE
PAUSE
8
Player
Mini-plug Cable
(Not provided)
Another recorder
(w/PAUSE connector)
Audio signal
Video signal
Your recorder
Recorder
PLAY
PLAY
OK
PROG
MENU
JOG
TIME SCAN SHUTTLE