Filter
Top Products
EN 39
Another recorder
RF Cable
(provided)
Another recorder
Recorder
21-pin SCART Cable
(not provided)
Player Your recorder Recorder Your recorderTV Receiver TV Receiver
RF Cable
(provided)
21-pin SCART Cable
(not provided)
Player
VIDEO
CHAN-
NEL or
AV mode
VIDEO
CHANNEL
or AV
mode
AV2 SELECT Setting
Set "AV2 SELECT" to the appropriate mode depending on
the type of unit connected to the rear panel AV2 IN/
DECODER connector of this recorder.
1 Press MENU to access the Main Menu screen.
2 Press %fi to move the highlight bar (pointer) to "MODE
SET", then press OK or .
3Press %fi to move the highlight bar (pointer) to "AV2
SELECT".
4 Press OK or to select one of the following:
a–VIDEO : If a connected device's output is
compatible only with regular video
signals, set "AV2 SELECT" to "VIDEO".
b–S-VIDEO : If a connected device's output is
compatible with Y/C signals, set "AV2
SELECT" to "S-VIDEO". This setting will
let you take advantage of higher-
quality S-VHS pictures.
c–DECODER : If a decoder is connected to the AV2
IN/DECODER connector, set "AV2
SELECT" to "DECODER". (See page 47 as
well.)
d–SAT : If a satellite tuner is connected to the
AV2 IN/DECODER connector, set "AV2
SELECT" to "SAT". (See page 46 as well.)
5 Press MENU to return to normal screen.
fi
fi
● If you are using a decoder or satellite tuner, be sure to set "AV2 SELECT" back to "DECODER" or "SAT" after editing.
● If you're not using a decoder or satellite tuner, leave "AV2 SELECT" set to "VIDEO" or "S-VIDEO".
● The default setting is "VIDEO"; if the recorder's memory backup has expired due to a power cut or because the AC was
removed from the recorder, "VIDEO" will be automatically selected when the power is restored to the recorder. If you are
using a decoder or satellite tuner, be sure to set "AV2 SELECT" back to "DECODER" or "SAT".
MODE SET
AUTO TIMER OFF
O. S. D. ON
B. E. S. T. ON
AUTO SP=LP TIMER OFF
DIGITAL 3R ON
POWER SAVE OFF
S-VHS AUTO
NEXT PAGE
[5∞] =
[MENU] : EXIT
PREVIOUS PAGE
EDIT OFF
AV2 SELECT VIDEO
COLOUR SYSTEM PAL/NTSC
TIME SCAN AUDIO ON
[5∞] =
[MENU] : EXIT
HR-S9500E HR-S9500EH
MODE SET
AUTO TIMER OFF
O. S. D. ON
B. E. S. T. ON
AUTO SP=LP TIMER OFF
DIGITAL 3R ON
S-VHS AUTO
EDIT OFF
NEXT PAGE
[5∞] =
[MENU] : EXIT
PREVIOUS PAGE
AV2 SELECT VIDEO
COLOUR SYSTEM PAL/NTSC
TIME SCAN AUDIO ON
[5∞] =
[MENU] : EXIT