Filter
Top Products
20 EN
PLAYBACK (cont.)
TimeScan
Your recorder is equipped with the TimeScan function. TimeScan
allows noise free pictures to be displayed on your TV screen in
the forward and reverse search modes. Audio will be played back
at normal speed during the TimeScan modes (੬ pg. 21).
TimeScan also allows you to view a programme in search mode
while listening to the audio.
NOTES:
●
"TIME SCAN AUDIO" must be set to "ON", or the sound will
not be heard in TimeScan mode. (
੬
pg. 21)
●
The audio will not synchronize with the video in TimeScan
modes.
●
During 1.5x speed TimeScan the audio playback speed will
also be 1.5 times normal, so dialog will sound fast-talking.
●
In Pause mode 3 seconds (approx.) of audio will be played
back repeatedly. (
੬
pg. 16)
●
In TimeScan search modes some of the audio information will
not be played so that the audio can keep up with the video.
1
2345
Audio signal during TimeScan
Sound of 1, 3 and 5 is heard.
Sound of 2 and 4 is not heard.
Output audio signal is normal (monaural) sound.
Playback tape
If the picture jitters vertically during still or variable-
speed search with a MESECAM tape:
1 Press PAUSE.
2 Press TV PROG + or – so that the vibration stops.
ACTIVATE VARIABLE-SPEED
SEARCH
1
During playback, press
@
or
#
.
● The more times you press, the faster the playback
picture moves.
● To decrease speed, press the button for the opposite
direction.
(Refer to the chart on page 21 for playback speeds).
To resume normal playback, press PLAY.
Variable-Speed Search
1 2 3
4 5 6
7 8 9
1
2
3
4
1
2
3
4
– –:– –
0
OK
MENU
PLAY
TV PROG
PAUSE
The PLAY, PAUSE, and TV PROG buttons on the recorder
have the same function as those on the remote control.