Filter
Top Products
15
ATTENTION
● The operations by JOG dial/SHUTTLE ring do not
include TimeScan (੬ pg. 40).
● In the high-speed search, still, slow-motion or frame-by-
frame playback mode,
● the picture will be distorted.
● noise bars will appear.
● there will be a loss of colour with a tape recorded in LP/
EP mode.
● Noise may appear or the picture may appear distorted
with an EP-recorded tape during still, slow-motion,
frame-by-frame playback or variable speed search.
● Picture may not appear during high-speed search with a
tape recorded in LP/EP mode.
● When normal playback resumes from search, still, slow
motion or frame-by-frame playback, the picture may
jitter vertically momentarily depending on the type of TV
being used.
Slow Motion
ACTIVATE SLOW-MOTION PLAY-
BACK
1
During playback or still picture, turn the SHUTTLE ring
to the right for forward slow motion, or to the left for
reverse slow motion (refer to the illustration on the left).
OR
During still picture, press and hold PAUSE for 2
seconds, then release. Press and release again to return
to still picture.
OR
During still picture, press and hold
@
or
#
. Release to
return to still picture.
To resume normal playback, press PLAY.
NOTES:
●
For Time Jog, see page 41.
●
Manual tracking is possible during slow motion playback.
(
੬
pg. 32)
Still Picture/Frame-By-Frame
Playback
PAUSE DURING PLAYBACK
1
Press PAUSE.
● During still picture, the sound from the previous
3 seconds (approx.) will be played back repeatedly
(provided there was at least 6 seconds of normal
playback prior to engaging the still picture mode).
● "TIME SCAN AUDIO" must be set to "ON", or the
sound will not be heard. (੬ pg. 41)
ACTIVATE FRAME-BY-FRAME
PLAYBACK
2
Turn the JOG dial to the right for forward frame-by-
frame playback, or to the left for reverse frame-by-frame
playback.
OR
Press PAUSE. Each time PAUSE is pressed the tape will
advance one frame.
OR
Press
@
or
#
. Each time one of these buttons is pressed
the tape will move one frame in the direction of the
arrow.
To resume normal playback, press PLAY.
NOTES:
•
Refer to the SHUTTLE ring illustration below as you read the
following procedures.
•
Reverse playback is possible only with a tape recorded in SP
mode.
R
e
v
e
r
s
e
R
e
v
e
r
s
e
R
e
v
e
r
s
e
S
l
o
w
P
l
a
y
F
o
r
w
a
r
d
s
e
a
r
c
h
p
l
a
y
s
l
o
w
m
o
t
i
o
n
s
e
a
r
c
h
Still
8
High-Speed (Turbo) Search
ACTIVATE HIGH-SPEED SEARCH
1
During playback or still, turn the SHUTTLE ring all the
way to the right for forward high-speed search, or to the
left for reverse high-speed search. Releasing SHUTTLE
resumes still picture playback.
OR
During playback or still picture, press FF for forward
high-speed search, or REW for reverse high-speed
search.
To resume normal playback, press PLAY.
NOTE:
For short searches, press and hold FF or REW during playback or
still picture. When released, normal playback resumes.
ACTIVATE VARIABLE-SPEED
SEARCH
1
During playback or still, turn the SHUTTLE ring to the
right for forward variable-speed search, or to the left for
reverse variable-speed search (refer to the illustration on
the left).
To resume normal playback, press PLAY.
NOTE:
Variable-speed search with TimeScan (
੬
pg. 40) can be used
by pressing the remote control's
@
or
#
button.
Variable-Speed Search