Filter
Top Products
Page 7 July 17, 2003 8:53 am
— 7 —
Playing back tape repeatedly (100 times)
— Repeat Play
During playback, press and hold 4 for more than 5 seconds. The
play indicator (
$
) on the display panel starts blinking slowly. To
stop playback, press 8 on the remote control or 0 on the
recorder.
N
O
TE:
Pressing 4, 3, 5 or 9 also cancels repeat playback.
Locating beginning of recordings
— Index Search
Index codes are placed on the tape at the beginning of each
recording when recording on this recorder.
A
While the tape is not running, press w or
e
on the remote
control to start search.
B
To access a recording of 2 to 9 index
codes away, press
w
or
e
repeatedly
until the correct number is displayed
on the screen (only if “O.S.D.” is set to
“ON” (
੬
11)). Playback begins
automatically when the desired
recording is located.
Locating beginning of timer recordings
— Instant Review
After ensuring that the recorder is turned off and that the timer
mode is disengaged, press REVIEW on the remote control.
● The recorder turns on, and rewinds to the index code indicating
the beginning of the last timer-recorded program, then begins
playback automatically.
● You can access a program of 2 to 9 index codes away from the
current position on the tape. If, for example, you have
5 programs recorded and you want to watch the third one, press
REVIEW three times.
● The Instant Review function will also operate if the recorder is
turned on.
Skipping unwanted portions
— Skip Search
Press 30 SEC on the remote control once to 4 times during
playback. Each press initiates a 30-second period of high speed
playback (up to 2 minutes). When the specified portion of the tape
is skipped, normal playback resumes automatically. To return to
normal playback during Skip Search, press 4.
Recording
Accidental erasure prevention
To prevent accidental recording on a
recorded cassette, remove its record
safety tab. To record on it later, cover
the hole with adhesive tape.
Basic Recording
A
Load a cassette
Make sure the record safety tab is intact. If not, cover the hole
with adhesive tape before inserting the cassette.
● The recorder turns on, and the counter is reset, automatically.
● Select the appropriate colour system with “PAL/MESECAM” and
“NTSC” in Function settings (
੬
10).
B
Select recording channel
Press PR r/t or the Number keys on the remote control or
PR +/– on the recorder.
NOTE:
You can select channel in the stop mode, recording pause mode
or during rewind/fast-forward.
C
Set tape speed
Press p(SP/LP/EP). The current setting for the tape speed
appears on the display panel and the screen for about 5 seconds.
Press p(SP/LP/EP) again to change the setting while tape speed
is displayed.
D
Start recording
On the recorder, press 7. Or on the remote control, while holding
7, press 4.
N
O
TE:
If the tape reaches its end during recording, the recording stops
and “
⅜
” and “ $” blink on the display window. Press 0 on
the recorder to eject the cassette or press 3 on the remote
control to rewind the tape.
6 2
2nd next
Beginning of the
current program
recorded
Current
position on
the tape
Beginning of the
2nd next program
recorded
Previous
program
recorded
Next
program
recorded
Turn on the TV and select the video channel or AV mode.
During recording
Pause recording
Press 9.
● Press 4 to resume recording.
● You can select channel in the recording pause mode.
Stop recording
Press 8 on the remote
control.
OR Press 0 on the recorder.
Record safety tab
– Playback –
HR-V400AG-EN.fm Page 7 Thursday, July 17, 2003 8:53 AM