Filter
Top Products
Page 5 May 29, 2003 2:34 pm
— 5 —
Language Setting
A
Access Main Menu screen, then
Initial Set screen
Press MENU on the remote control. Press
rt
to place the pointer next to “INITIAL
SET”, then press OK or
e
.
B
Access Language Select screen
Press
rt
to place the pointer next to “LANGUAGE”, then press
OK or
e
.
C
Select language
Press
rt
to place the pointer next to
the language of your choice (English,
Chinese or Russian), then press OK or
e
.
Press MENU to return to normal screen.
Clock Setting
A
Access Main Menu screen, then Initial Set screen
Press MENU on the remote control. Press
rt
to place the
pointer next to “INITIAL SET”, then press OK or
e
.
B
Access Clock Set screen
Press
rt
to place the pointer next to
“CLOCK SET”, then press OK or
e
.
C
Set time, date and year
Press
rt
until the desired time appears,
then press OK or
e
. Set the date and year
in the same way.
● Holding
rt
changes the time in
30-minute intervals, or changes the date
in 15-day intervals.
NOTE:
If the year digits are automatically cleared, it is possible that you
have input February 29th in a non-leap year. Input the correct
data.
D
Start clock
Press MENU and normal screen appears.
To make corrections any time during the process
Press OK or
e
repeatedly until the item you want to change
blinks, then press
rt
.
Playback
Basic Playback
A
Load a cassette
Make sure the window side is up, the rear label side is facing you
and the arrow on the front of the cassette is pointing towards the
recorder.
● Do not apply too much pressure when inserting.
● The recorder turns on, and the counter on the on-screen display
is reset, automatically.
● Select the appropriate colour system with “PAL/MESECAM” and
“NTSC” in Function settings.
● If the cassette’s record safety tab has been removed, playback
begins automatically.
B
Start playback
Press
4
.
[ / ]
[MENU] : EXIT
MAIN MENU
FUNCTION SET
TUNER SET
INITIAL SET
[ / ]
[MENU] : EXIT
INITIAL SET
CLOCK SET
LANGUAGE
G-CODE/SHOWVIEW SETUP
* For HR-V600AG only
*
[ / ]
[MENU] : EXIT
INITIAL SET
CLOCK SET
LANGUAGE
G-CODE/SHOWVIEW SETUP
* For HR-V600AG only
*
[ / ]
[MENU] : EXIT
CLOCK SET
TIME DATE YEAR
0 : 00 01.01 03
Turn on the TV and select the video channel or AV mode.
ATTENTION
In the search, still, slow-motion or frame-by-frame playback
mode,
● the picture will be distorted.
● the noise bars will appear.
● there may be a loss of colour
During playback
Stop playback
Press
8
on the remote
control.
OR Press
0
on the recorder.
Pause playback and view still picture
Press
9
.
● Press
4
to resume normal playback.
Pause and Frame-by-Frame playback
Press
9
to pause, then press
6
(or
9
) repeatedly.
● Press
4
to resume normal playback.
Picture search
Press
3
or
5
. Press
3
or
5
again to perform high-
speed search.
● Each time you press
3
or
5
, the search speed changes
between low-speed and high-speed.
● Press
4
to resume normal playback.
Variable speed picture search
Press
w
or
e
repeatedly.
● Press
4
to resume normal playback.
● Each time you press
w
or
e
, the playback speed changes. To
decrease the speed during picture search, press the opposite
direction button repeatedly.
● During still picture, press and hold
e
to start forward (or
w
to
start reverse) slow motion playback. When you release the
button, still picture resumes. During still picture, holding
9
for
more than 2 seconds also starts forward slow motion playback.
If you press
9
again, still picture resumes.
– Initial Settings –
HR-V600AA.AG_EN_001B.fm Page 5 Thursday, May 29, 2003 2:34 PM