Filter
Top Products
January 24, 2003 11:21 am Page 6
— 6 —
Master Page: Right
C
Make connections
Connect the recorder’s L-2 IN/DECODER connector to the satellite
receiver’s 21-pin SCART connector.
D
Connect Satellite Controller to recorder
Connect the Satellite Controller to the SAT CONTROL connector
on the rear panel.
E
Turn on satellite receiver
Turn on the satellite receiver’s power.
F
Access Main Menu screen, then Initial Set screen
Press MENU. Press rt to place the pointer next to “INITIAL
SET”, then press OK or e.
G
Access Sat Control Set screen
Press rt to place the pointer next to “SAT CONTROL SET”, then
press OK or e.
H
Enter satellite receiver’s brand
Press the appropriate number keys to enter
the brand code from the following list,
then press OK.
● If the code you entered is invalid, the
code field will be reset. Enter the correct
code again.
I
Select satellite receiver’s channel for testing
Press the appropriate number keys to enter the channel position
on the satellite receiver, then press OK. The recorder enters the
test mode.
J
Check result of the test
If the satellite receiver’s channel number
has been changed to the same one as you
set in step 9
99
9 …
Press rt to place the pointer next to
“CHANGED TO …”, then press OK or e
to finish the Sat Control Set mode.
If the satellite receiver’s channel number has not been changed
correctly …
Press rt to place the pointer next to “NOT CHANGED”, then
press OK or e. Then perform the procedure again from step 8
88
8.
NOTE:
The Satellite Controller may not function properly with some types
of satellite receiver.
Basic Playback
A
Load a cassette
Make sure the window side is
up, the rear label side is facing
you and the arrow on the front of
the cassette is pointing towards
the recorder.
● Do not apply too much pressure when inserting.
● The recorder turns on, and the counter is reset, automatically.
● If the cassette’s record safety tab has been removed, playback
begins automatically.
B
Start playback
Press 4.
BRAND NAME CODE BRAND NAME CODE
JVC
AMSTRAD
ASTON
CANAL
SATELLITE
CANAL +
D-BOX
ECHOSTAR
(VIA DIGITAL)
FINLUX
FORCE
GALAXIS
GRUNDIG
HIRSCHMANN
HUMAX
ITT NOKIA
JERROLD
KATHREIN
LUXOR
MASCOM
73
60, 61, 62, 63, 92
97
81
81
85
82
68
89
88
64, 65, 102
64, 78, 99
88
68
75
70, 71, 96
68
93
MASPRO
NOKIA
PACE
PANASONIC
PHILIPS
RADIX
RFT
SABA
SAGEM
SALORA
SAMSUNG
SIEMENS
SKYMASTER
TECHNISAT
THOMSON
TPS
TRIAX
WISI
70
87, 94
65, 67, 74, 86,
92, 97
74, 92
66, 84, 101
78
69
97
83, 90
68
83
64
69, 98
66, 100
97
83
91
64
Transmitter
Satellite Controller
(not provided)
Satellite receiver
To L-2 IN/
DECODER
To VCR
connector
21-pin SCART cable
(not provided)
Your recorder
To SAT CONTROL
Playback
Turn on the TV and select the video channel or AV mode.
During playback
Stop playback
Press 8 on the remote
control.
OR Press 0 on the recorder.
Pause playback and view still picture
Press 9.
● Press 4 to resume normal playback.
● If there is vertical jitter, press PR r/t on the remote control or
PR+/– on the recorder to correct the picture.
Pause and Frame-by-Frame playback
Press 9 to pause, then press w or e (or 9) repeatedly.
● Press 4 to resume normal playback.
Picture Search
Press 3 or 5. Press 3 or 5 again to perform high-
speed search.
● Each time you press 3 or 5, the search speed changes
between low-speed and high-speed.
● Press 4 to resume normal playback.
Variable Speed Search (including slow-motion)
Press w or e repeatedly.
● Press 4 to resume normal playback.
● Each time you press w or e, the playback speed changes. To
decrease the speed during picture search, press the opposite
direction button repeatedly.
● During still picture, press and hold e to start forward (or w to
start reverse) slow motion playback. When you release the
button, still picture resumes. During still picture, holding 9 for
more than 2 seconds also starts forward slow motion playback.
If you press 9 again, still picture resumes.
● During slow motion playback, some noise may appear on the
TV screen. Press PR r/t on the remote control or PR+/– on
the recorder to eliminate the noise.
HR-V600_001EN.fm Page 6 Friday, January 24, 2003 11:21 AM