Filter
Top Products
advanced features44
Power Save Mode
You can reduce the power consumption while the VCR is turned off.
get to the mode set screen Press MENU button. Move the
highlight bar to
MODE SET using the PR and PR buttons
and press OK button (or ).
select power save mode Move the highlight bar to POWER
SAVE
using the PR and PR buttons. Press OK button
(or ) to select
ON or OFF.
return to normal screen Press MENU button.
NOTES:
• During Power Save, the display panel will be turned off.
• The Just Clock function (੬ pg. 54) does not work while the Power Save mode is engaged.
• While the VCR is in the Power Save mode, the picture may be distorted momentarily when
you turn on/off the VCR.
• Power Save does not work when ...
... the VCR is in the Timer mode.
... the VCR’s power is turned off after timer-recording (or Instant Timer Recording).
... the Auto Satellite Prog Recording mode is engaged (੬ pg. 40).
Auto SP a LP Timer
When timer recording in SP mode, if the VCR calculates that there isn’t enough tape to record
the complete programme, it will automatically switch from
SP to LP mode.
get to the mode set screen Press MENU button. Move the
highlight bar to
MODE SET using the PR and PR buttons
and press OK button (or ).
enable/disable auto spalp timer Select AUTO SPaLP
TIMER
using the PR and PR buttons and press OK button
(or ) to toggle between
ON and OFF.
return to normal screen Press MENU button.
[1] a k
[MENU]: EXIT
MODE SET
B.E.S.T. ON
PICTURE CONTROL AUTO
AUTO TIMER OFF
O.S.D. ON
DIRECT REC ON
AUTO SP a LP TIMER OFF
POWER SAVE ON
AUTO POWER OFF OFF
F
[1] a k
[MENU]: EXIT
MODE SET
B.E.S.T. ON
PICTURE CONTROL AUTO
AUTO TIMER OFF
O.S.D. ON
DIRECT REC ON
AUTO SP a LP TIMER ON
POWER SAVE OFF
AUTO POWER OFF OFF
F
HR-V615/616/617EK-EN/p43-47 3/8/04, 10:20 AM44
Black