Filter
Top Products
advanced features30
Picture Quality
Manual Tracking
Your VCR is equipped with automatic tracking control. This will
be adequate for most tapes and will automatically adjust the
tracking to suit the particular tape in use but if you insert an old
or worn tape, it may be necessary to manually adjust the track-
ing in order to get the best picture. If automatic tracking fails, you will notice noise bars appear-
ing across the picture; you can correct this by manually overriding the tracking using the follow-
ing steps.
override automatic tracking During playback, press / on the Remote Control to
engage manual tracking.
adjust tracking manually Use the PR + or – buttons to adjust the tracking manually.
NOTES:
• Press / again to re-engage automatic tracking.
• When a new tape is inserted, the VCR returns to automatic tracking.
Picture Control
This feature allows you to select the most appropriate picture quality according to the type of
tape or use of this VCR. The default setting is
AUTO.
get to the mode set screen Press MENU button. Move the highlight bar to MODE SET
using the PR and PR buttons and press OK button (or ).
select picture control mode Move the highlight bar to PICTURE CONTROL using the PR
and PR buttons. Press OK button (or ) to select the desired mode:
•
AUTO (NORM) Provides optimised picture benefits of
B.E.S.T. Picture System. When
B.E.S.T. is OFF, PICTURE
CONTROL
switches automatically from AUTO to NORM.
•
EDIT Minimizes picture degradation during editing (record-
ing or playback).
•
SOFT Reduces image coarseness when viewing overplayed
tapes containing lots of noise.
return to normal screen Press MENU button.
[1] a k
[MENU]: EXIT
MODE SET
B.E.S.T. ON
PICTURE CONTROL AUTO
AUTO TIMER OFF
O.S.D. ON
DIRECT REC ON
AUTO SP a LP TIMER OFF
POWER SAVE OFF
AUTO POWER OFF OFF
F
HR-V715EK-EN/p29-42 3/8/04, 02:18 PM30
Black