JVC HR-VP472U VCR User Manual


 
16 EN
SIMPLE PLAYBACK AND RECORDING
Simple
Playback
LOAD A CASSETTE
1
Make sure the window side is up, the rear label side is
facing you and the arrow on the front of the cassette is
pointing towards the VCR. Don’t apply too much
pressure when inserting.
The VCR’s power comes on automatically.
The counter is automatically reset to "0:00:00".
If the cassette's record safety tab has been removed,
playback begins automatically.
FIND PROGRAM START
POINT
2
If the tape is advanced past the start point, press REW.
To go forward, press FF.
START PLAYBACK
3
Press PLAY. "VIDEO CALIBRATION" appears on the
screen (when VIDEO CALIBRATION is set to "ON"
pg. 26).
STOP PLAYBACK
4
Press STOP or STOP/EJECT. Then press STOP/EJECT
to remove the cassette.
Turn on the TV and select the VCR channel 3 or 4 (or AV
mode).
Usable cassettes
Full-Size VHS
T-30 (ST-30**)
T-60 (ST-60**)
T-90
T-120 (ST-120**)
T-160 (ST-160**)
ST-210**
Compact VHS*
TC-20 (ST-C20**)
TC-30 (ST-C30**)
TC-40 (ST-C40**)
* Compact VHS camcorder recordings can be played on
this video recorder. Simply place the recorded cassette
into a VHS Cassette Adapter and it can be used just like
any full-sized VHS cassette.
**This video recorder can record on regular VHS and
Super VHS cassettes. However, it will record regular
VHS signals only.
INFORMATION
This video recorder is equipped with SQPB (S-VHS QUASI
PLAYBACK) that lets you watch tapes recorded in the S-VHS
format with regular VHS resolution.
SQPB does not deliver Super VHS resolution.
S-VHS recording is not possible with this video recorder.
[VP672U]
FF
STOP/EJECT
STOP/EJECT
PLAY
FF
[VP472U]
123
456
7
89
0
2
4
1
3
PLAY
REW (Rewind)
FF (Fast-Forward)
STOP
PLAY
REW
REW