Filter
Top Products
42
Edit To Or
From Another
VCR
You can use your VCR as the player or the recorder.
MAKE CONNECTIONS
1
Connect an AV cable (not supplied) between the
player’s VIDEO OUT and AUDIO OUT connectors and
the recorder’s VIDEO IN and AUDIO IN connectors.
● When using your VCR as the recorder and a monaural
VCR as the player, connect the player’s AUDIO OUT
connector to the AUDIO IN L connector on the recorder.
LOAD CASSETTES
2
Insert the playback cassette into the player and the
cassette to be recorded on into the recorder.
SET RECORDER’S INPUT
MODE
3
Set to AUX. With this VCR, press NUMBER key “0” (AU
appears on the front display panel in place of a channel
number).
NOTE:
When using this VCR as the recorder, make sure to select
"FRONT" or "REAR" (depending on which input connec-
tors you use) at the Aux Input Screen. (To select the correct
AUX input connector, follow steps 4, 5, 9 – 11 from the
"Edit From A Camcorder" section,
੬
pg. 43.)
START PLAYER
4
Set to its play mode.
START RECORDER
5
Set to its record mode.
Player
Your VCR
AUDIO OUT
VIDEO OUT
VIDEO IN
AUDIO IN
Another VCR
Recorder
EDITING
12
45
3
6
8
0
7
9
NUMBER "0"