Filter
Top Products
10
2
TV multi-brand remote control
Press and hold VCR on the remote control until you finish the
step 2.
1
The DVD/VCR’s remote control can
control several functions on JVC
remote control TVs and on the
brands of remote control TVs listed
below.
Turn the power off the TV using theTV’s remote control.
Make sure TV/VCR/DVD switch has been slided to TV.
Preparation:
•
•
Enter your TV’s brand code using the Number keys, then
press ENTER.
Once you have set the remote control to operate the TV,
you don’t have to repeat this step until you replace your
remote control’s batteries.
PANASONIC has two codes. If the TV does not function
with one code, try entering the other.
•
•
3
First, press TV POWER on the remote to see if the TV’s
power goes on as it should. If it does, try other operations.
The TV POWER, TV CH+/–, TV VOL+/–, ENTER, INPUT
and Number keys on the remote can all be used to operate
the TV. *For some brands of TV, you must press ENTER
after having pressed the Number keys.
•
Depending on the type of TV, there may
be cases where some or all functions
cannot be operated using the remote
control.
NOTE:
01
02
03
04, 11
05
06
07
08
09
10
12
13
13
JVC
MAGNAVOX
MITSUBISHI
PANASONIC
RCA
SHARP
SONY
TOSHIBA
ZENITH
HITACHI
SAMSUNG
SANYO
SEARS
TV BRAND NAME BRAND CODE
2C50801AE(10-15) 7/10/03, 10:3810