Filter
Top Products
28
PICTURE menu
HV-36P38SJE/32/28P37SJE / LCT1536-001A-U / ENGLISH
MIN:
The level of DigiPure effect is set to the
minimum. When you set the Super DigiPure
function to AUTO and notice some noise,
change the setting from AUTO to MIN.
• The MIN setting is not suitable for high-
quality pictures which contain very little
noise.
MAX:
The level of DigiPure effect is set to the
maximum. If you set the Super DigiPure
function to AUTO but feel that the original
picture quality has not been reproduced fully,
change the setting from AUTO to MAX.
• The MAX setting is not suitable for low-
quality pictures which contain a lot of
noise.
OFF:
The Super DigiPure function is turned off.
MOVIE THEATRE
The MOVIE THEATRE function displays a
cinema film picture more smoothly and
naturally on the screen.
AUTO:
The television automatically recognizes the
type of signal and turns the function on and
off.
ON:
This function is turned on.
OFF:
This function is turned off.
• The motion may appear unnatural when
viewing images with the NTSC colour
system. When the MOVIE THEATRE
function is set to AUTO or ON, the
motion may appear unnatural when
viewing images with the NTSC colour
system.
Colour DigiPure
Makes the colour outline stand out and
increases the sharpness giving a clearer
picture.
ON:
Colour DigiPure works. Normally use with
this function turned on.
OFF:
Colour DigiPure doesn't work. This gives a
less clear picture than when this function is
turned on.
COLOUR SYSTEM
The colour system is chosen automatically.
However, if the picture is not clear or no
colour appears, choose the colour system
manually.
1 Choose COLOUR SYSTEM. Then
press the a
aa
a or 3
33
3 button
The sub-menu of the COLOUR SYSTEM
function appears.
2 Press the 5
55
5 buttons to choose
MAIN or SUB
MAIN:
You can change the colour system of the
main-picture.
SUB:
You can change the colour system of the
sub-picture.
• Choose MAIN when a sub-picture is
not displayed.
3 Press the 6
66
6 buttons to choose
the appropriate colour system.
Then press the a
aa
a button
PAL:
PAL system
SECAM:
SECAM system
NTSC 3.58:
NTSC 3.58 MHz system
NTSC 4.43:
NTSC 4.43 MHz system
D0016-EN
>> COLOUR SYSTEM
MAIN
SUB
PAL
AUTO
OK
HV-36P38SJE_Eng.book Page 28 Friday, September 26, 2003 10:44 AM