JVC HV-36P38SUE, HV-32P37SUE, HV-28P37SUE CRT Television User Manual


 
SET UP menu
35
ENGLISH
HV-36P38SUE/32/28P37SUE / LCT1537-001A-U / English
When the COUNTRY setting is not
FRANCE, use a two-digit CH/CC
number. When the COUNTRY setting is
FRANCE, use a three-digit CH/CC
number.
INSERT
1 Press the 6
66
6 buttons to choose a
Programme number (PR) for which
you will register a new TV channel
2 Press the green button and start
the INSERT function
3 Press the 6
66
6 buttons to choose
“CC” or “CH” according to the CH/
CC number of the TV channel
When the COUNTRY setting is
FRANCE:
Choose “CH1”, “CH2”, “CC1” or “CC2”.
To cancel the INSERT function:
Press the b button.
4 Press the Number buttons to enter
the remaining CH/CC number
The TV shifts to registration mode.
When the registration is completed, the
picture of the TV channel appears on the
screen.
The CH/CC number is a number
indicating the broadcast frequency to
the TV. If the TV cannot detect the TV
channel corresponding to the broadcast
frequency indicated by the CH/CC
number, a picture in the no-signal state
appears.
MANUAL
1 Press the 6
66
6 buttons to choose a
Programme number (PR) to which
you want to register a new TV
channel
2 Press the blue button to activate
the MANUAL function
At the right side following the CH/CC
number, the SYSTEM (broadcasting
system) of the TV channel appears.
To cancel the MANUAL function:
Press the b button.
3 Press the 3
33
3 button to choose the
SYSTEM (broadcasting system) for
a TV channel you want to register
TV channel (SECAM-L system)
from a French station:
Set the SYSTEM to “L”. If it is set to one
other than “L”, you cannot receive the TV
channel of the SECAM-L system.
Other TV channels:
If you do not know the correct
broadcasting system, set the SYSTEM to
“B/G”. If “B/G” is not correct, it results in
the fact that you will not hear the sound
normally when the TV detects a TV
channel. In this case, retry to set the
SYSTEM again correctly so that no
problem arises.
4 Press the green or red button to
search for a TV channel
Scanning stops when the TV finds a TV
channel. Then the TV channel is
displayed.
D0034-EN
> EDIT
CH/CC
PR ID
AV
01
02
03
04
05
06
07
08
09
CH/CC
BBC1
31
CH/CC
CH/CC 31
09
CH/CC 32
OK
CH/CC
D0035-EN
> MANUAL
CH/CC
PR ID
AV
01
02
03
04
05
06
07
08
09
CH/CC
BBC1
31
CH/CC
32
OK
CH/CC 31
SYSTEM
FINE+
FINE-
SEARCH+
SEARCH-
(
B / G
)
HV-36P38SUE_Eng.book Page 35 Friday, September 26, 2003 11:10 AM