Filter
Top Products
Button Functions - PIP
48
Freeze
Swap
Channel +/- for PIP
Source
Use the FREEZE button to lock a single, still image onto the PIP window.
• If PIP is off when F
REEZE is pressed, a snapshot of the main screen is taken and placed in
the PIP window.
• If PIP is on when F
REEZE is pressed, the image in the window when the button was pressed
is held.
You can exchange the channel displayed on the main screen for the one shown in the PIP win-
dow by pressing SWAP.
Like the main CHANNEL +/- buttons, CHANNEL +/- for PIP lets you scan through the channels in
the PIP window.
• Direct channel selection with the 10 key pad for PIP is not possible.
You can select the signal source for the PIP window image.
• If the PIP does not have a signal, the window will be blue.
• If you connect a device using the V2 COMPONENT-IN (Y, P
B, PR), the PIP signal will only
show the V2 COMPOSITE-IN (VIDEO) signal. Use the V2 COMPOSITE-IN to properly dis-
play the PIP signal.
• The PIP window is
1
/
9
the size of the full screen.
• PIP will not display blocked channels or programs. A blue screen will display instead.
• You can adjust the PIP window picture the same as the main picture. (See page 37).
NOTES:
EZ-Surf (AV-27F803, AV-32F803, AV-36F803 only)
EZ-Surf utilizes the PIP window to surf all the available channels so that you don’t have to
change your current program to see what else is on TV.
• If the PIP window is off, you can see the channel and XDS only.
TV V-1 V-2 V-3 V-4
AV-27,32,36F703/713/803 English 6/14/02 5:07 PM Page 48