Filter
Top Products
b–INSTANT TIMER RECORDING
a–BASIC RECORDING
4
4
WATCH A RECORDED PROGRAM
5
5
RECORD A PROGRAM
* You can use the available buttons on the remote control or on the VCR.
1 Load a cassette with the label facing out and the window facing up.
2 Press VHS or DV to select the deck.
3 Press REW or FF to find program start point.
4 Press PLAY to start playback.
5 Press STOP, then press EJECT to remove the cassette.
* You cannot perform ITR using the remote control.
1 Press REC to start recording.
2 Press REC to engage ITR. “0:30” appears in the VCR display.
3 To extend duration in increments of 30 minutes, press REC as many times as necessary.
* You can use the available buttons on the remote control or on the VCR.
1 Load a cassette as above.
2 Press VHS or DV to select the deck.
3 Press CH, or press the appropriate NUMBER keys (remote) and press ENTER (remote),
to select the recording channel.
4 Press SP/EP (remote) to set the recording speed.
5 Press REC and PLAY together (remote) or REC (VCR) to start recording.
6 Press PAUSE to stop recording temporarily, and press PLAY to resume.
7 Press STOP, then press EJECT to remove the cassette.
SP
VCR