Filter
Top Products
34
7 Press or to select “Position”, then press or OK.
8 Press or to select where you want to display the second screen, then press OK.
9 Press or to select “Size”, then press or OK.
10 Press or to select the screen size, then press OK.
11 Press or to select “Audio”, then press or OK.
12 Press or to select an option, then press OK. Options are:
• “Main”: The output audio is from the main input source.
• “PIP/POP”: The output audio is from the secondary input source.
13 Press OK.
14 Press to return to the previous screen or press RETURN to close the menu screen.
POP (Picture-Over-Picture)
With POP, you can select a second input source and display its output over the main input source
picture. The picture size and position are the same with the main input source.
1 Press MENU.
2 Press or to select “PIP”, then press or OK.
3 Press or to select “PIP Mode”, then press or OK.
4 Press or to select “POP”, then press or OK.
5 Press or to select “Source”, then press or OK to enter the submenu.
6 Press or to select the second input source, then press or OK.
Note: Some input sources do not support this feature. See the PIP/POP Table on page 37.
7 Press or to select “Audio”, then press or OK.
8 Press or to select an option, then press OK. Options are:
• “Main”: The output audio is from the main input source.
• “PIP/POP”: The output audio is from the secondary input source.
9 Press OK.
10 Press to return to the previous screen or press RETURN to close the menu screen.
Adjusting the Menu Settings