Filter
Top Products
Notes:
• Green, blue and red are the most common colors for DVD cables. Some models may vary
colors. Please consult the user’s manual for your DVD player for more information.
• Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete
one set of connections (DVD or audio output) before starting the other to avoid accidentally
switching the cables.
• If you use INPUT 2 (Component-In), for a DVD connection, you must select
"V2-COMPONENT" by pressing the I
NPUT button, for proper display of the DVD signal.
• Progressive DVD players (players with an output scan of 31.5 KHz) will not work properly with
this television. Set your DVD player’s output to “interlaced”, or non-progressive mode.
Diagram #3
Illustration of AV-20FA44
Quick Setup Connections
OUT
R L V
IN
OUT
IN
Cable or Antenna
Output
Coaxial Cable
TV Rear Panel
Green
Blue
Red
DVD Player (OPTIONAL)
Y
P
B
PR
OUT
AUDIO OUT
L R
OR
VCR
TV Rear Panel
Speake
r
Speaker
Amplifier
1) Connect a white composite cable from the LEFT AUDIO OUTPUT on the back of the TV to
the LEFT AUDIO INPUT on the amplifier.
2) Connect a red composite cable from the RIGHT AUDIO OUTPUT on the back of the TV to
the RIGHT AUDIO INPUT on the amplifier
Notes:
• Refer to your amplifier’s manual for more information.
• You can use AUDIO OUTPUT for your home theater system.
Connecting to an External Amplifier
Illustration of AV-20FA44
13
AV-20FA44 English 13 8/19/03, 9:37:32 AM