Filter
Top Products
42
Button Functions
The RETURN+ button has two functions:
Return - Returns to the channel viewed just before the channel currently onscreen.
Return+ - Lets you program a specific channel to return to while scanning through the channels
using the CH+ and CH– buttons.
R
ETURN+ and hold for three seconds
The channel currently active has been programmed as your return+ channel. Now scan through
the channels using the C
HANNEL+/– buttons.
RETURN+
You will return to your programmed channel.
• To cancel your Return+ channel, press and hold the RETURN+ button for three seconds. The
message “RETURN CHANNEL CANCELLED!” will appear.
• Return+ works only with the CH+/– buttons. Pressing any number key will cancel Return+.
Return +
Selects the signal input source for the television: TV (for Antenna or Cable) or Video-1, 2, or
V2-Component or Video-3 for video devices like VCR’s, DVD players, or camcorders.
Press the I
NPUT button
Note:
• You can also access the input menu screen by using the MENU button on the side of the TV
instead of the remote control. It appears between INITIAL SETUP and PICTURE ADJUST
screen. Choose the INPUT by pressing MENU
†
on the side panel and select TV or VIDEO
INPUT by using the C
HANNEL +/- buttons (
√
OPERATE
®
).
Input
RETURN CHANNEL
PROGRAMMED!
TV VIDEO-1 VIDEO-2 VIDEO-3V2-COMPONENT
LCT1784-001A-A ENG 42 12/14/04, 10:19:33 AM