JVC AV 32230 CRT Television User Manual


 
General Items
37
The On/Off timer lets you program your television to turn itself on or off. You can use it as an alarm
to wake up, to help you remember important programs, or as a decoy when you're not home.
Press the M
ENU
button
To ON/OFF TIMER
➛❿
To operate (begins with ON TIME)
➛❿
To set the hour (AM/PM) you want the TV to turn on
To move to minutes
➛❿
To set the minutes
To accept ON TIME and move to OFF TIME (the time the TV will turn off). Set the
OFF TIME the same way as ON TIME
To accept OFF TIME and move to CHANNEL
➛❿
To select channel
To move to MODE
➛❿
Choose ONCE or EVERYDAY
To ON/OFF TIMER
➛❿
Choose YES to accept the timer setting, choose NO if you don't wish to accept
To FINISH
➛❿
To save settings
On/Off Timer
The On/Off time cannot be set to locked or guarded channels.
In order for the On/Off timer to work, the clock must be set.
After a power interruption, the Timer settings must be reset.
NOTES:
On/Off Timer Note for PIP (AV-27260, AV-32260 and AV-36260 only).
If the television is on when a timed event is about to start a Timer Preview window will appear. The
Timer Preview window will appear in the lower right corner of the screen seven seconds before the
timer is programmed to begin. When the timer activates, the Preview picture will become the main
picture.